Split reset for primary and secondary displays

src/bin/main.rs

@@ -28,7 +28,7 @@ use embedded_hal_bus::i2c::AtomicDevice;
 use embedded_hal_bus::util::AtomicCell;
 use esp_hal::Blocking;
 use esp_hal::clock::CpuClock;
-use esp_hal::gpio::{Input, InputConfig, Pull};
+use esp_hal::gpio::{Input, InputConfig, Level, Output, OutputConfig, Pull};
 use esp_hal::i2c::master::{Config as I2cConfig, I2c};
 use esp_hal::timer::timg::TimerGroup;
 use log::error;
@@ -72,10 +72,22 @@ async fn main(spawner: Spawner) {
         peripherals.GPIO37, // miso
         peripherals.GPIO11, // primary cs
         peripherals.GPIO13, // oled cs
-        peripherals.GPIO10, // shared reset
+        peripherals.GPIO10, // primary reset
+        peripherals.GPIO47, // secondary reset
         peripherals.GPIO12, // shared dc
     )));
 
+    let _secondary_oled_cs_2 = Output::new(
+        peripherals.GPIO14,
+        Level::High,
+        OutputConfig::default(),
+    );
+    let _secondary_oled_cs_3 = Output::new(
+        peripherals.GPIO21,
+        Level::High,
+        OutputConfig::default(),
+    );
+
     let config = I2cConfig::default().with_frequency(esp_hal::time::Rate::from_khz(400));
     let i2c = match I2c::new(peripherals.I2C0, config) {
         Ok(bus) => bus

src/display/shared_bus.rs

@@ -1,4 +1,3 @@
-use crate::display::primary_lcd::{PrimaryLcdDisplay, init_primary_lcd_on_bus};
 use alloc::boxed::Box;
 use embassy_sync::blocking_mutex::raw::CriticalSectionRawMutex;
 use embedded_hal::digital::ErrorType;
@@ -12,6 +11,7 @@ use esp_hal::spi::master::{Config as SpiConfig, Spi};
 use esp_hal::time::Rate;
 
 use crate::display::secondary_oled::{SecondaryOledDisplay, init_secondary_oled_on_bus};
+use crate::display::primary_lcd::{PrimaryLcdDisplay, init_primary_lcd_on_bus};
 
 use core::cell::RefCell;
 use embassy_sync::blocking_mutex::Mutex as BlockingMutex;
@@ -52,14 +52,15 @@ pub type DualPrimaryDisplay<'a> =
 pub type DualSecondaryDisplay<'a> =
     SecondaryOledDisplay<'a, DisplaySpiBus, SharedPin<'a, Output<'a>>, SharedPin<'a, Output<'a>>>;
 
-pub fn init_dual_displays<SPI, SCK, MOSI, MISO, CS1, CS2, RES, DC>(
+pub fn init_dual_displays<SPI, SCK, MOSI, MISO, CS1, CS2, RES1, RES2, DC>(
     spi_peripheral: SPI,
     sck: SCK,
     mosi: MOSI,
     miso: MISO,
     cs_primary: CS1,
     cs_secondary: CS2,
-    reset_pin: RES,
+    reset_primary: RES1,
+    reset_secondary: RES2,
     dc_pin: DC,
 ) -> (DualPrimaryDisplay<'static>, DualSecondaryDisplay<'static>)
 where
@@ -69,7 +70,8 @@ where
     MISO: PeripheralInput<'static>,
     CS1: OutputPin + 'static,
     CS2: OutputPin + 'static,
-    RES: OutputPin + 'static,
+    RES1: OutputPin + 'static,
+    RES2: OutputPin + 'static,
     DC: OutputPin + 'static,
 {
     let spi = Spi::new(
@@ -84,15 +86,17 @@ where
     .with_miso(miso);
 
     let bus_static: &'static AtomicCell<_> = Box::leak(Box::new(AtomicCell::new(spi)));
-    let reset_static =
-        SharedPin::pre_wrap(Output::new(reset_pin, Level::High, OutputConfig::default()));
+    let reset_primary_static =
+        SharedPin::pre_wrap(Output::new(reset_primary, Level::High, OutputConfig::default()));
+    let reset_secondary_static =
+        SharedPin::pre_wrap(Output::new(reset_secondary, Level::High, OutputConfig::default()));
     let dc_static = SharedPin::pre_wrap(Output::new(dc_pin, Level::High, OutputConfig::default()));
     let mut delay = Delay::new();
 
     let primary = init_primary_lcd_on_bus(
         bus_static,
         cs_primary,
-        SharedPin::new(reset_static),
+        SharedPin::new(reset_primary_static),
         SharedPin::new(dc_static),
         &mut delay,
     );
@@ -100,7 +104,7 @@ where
     let secondary = init_secondary_oled_on_bus(
         bus_static,
         cs_secondary,
-        SharedPin::new(reset_static),
+        SharedPin::new(reset_secondary_static),
         SharedPin::new(dc_static),
         &mut delay,
     );