final

case/YAPP_Box/YAPP_Template_v3.scad

@@ -0,0 +1,593 @@
+//-----------------------------------------------------------------------
+// Yet Another Parameterized Projectbox generator
+//
+//  This is a box for <template>
+//
+//  Version 3.1.2 (2024-04-16)
+//
+// This design is parameterized based on the size of a PCB.
+//
+// For many/complex cutoutGrills, you might need to adjust
+//  the max number of elements in OpenSCAD:
+//
+//      Preferences->Advanced->Turn off rendering at 250000 elements
+//                                                   ^^^^^^
+//
+//-----------------------------------------------------------------------
+
+include <./YAPPgenerator_v3.scad>
+
+//---------------------------------------------------------
+// This design is parameterized based on the size of a PCB.
+//---------------------------------------------------------
+// Note: length/lengte refers to X axis, 
+//       width/breedte refers to Y axis,
+//       height/hoogte refers to Z axis
+
+/*
+      padding-back|<------pcb length --->|<padding-front
+                            RIGHT
+        0    X-axis ---> 
+        +----------------------------------------+   ---
+        |                                        |    ^
+        |                                        |   padding-right 
+      Y |                                        |    v
+      | |    -5,y +----------------------+       |   ---              
+ B    a |         | 0,y              x,y |       |     ^              F
+ A    x |         |                      |       |     |              R
+ C    i |         |                      |       |     | pcb width    O
+ K    s |         |                      |       |     |              N
+        |         | 0,0              x,0 |       |     v              T
+      ^ |    -5,0 +----------------------+       |   ---
+      | |                                        |    padding-left
+      0 +----------------------------------------+   ---
+        0    X-as --->
+                          LEFT
+*/
+
+
+//-- which part(s) do you want to print?
+printBaseShell        = true;
+printLidShell         = true;
+printSwitchExtenders  = true;
+printDisplayClips     = true;
+
+// ********************************************************************
+// The Following will be used as the first element in the pbc array
+
+//Defined here so you can define the "Main" PCB using these if wanted
+pcbLength           = 150; // front to back (X axis)
+pcbWidth            = 100; // side to side (Y axis)
+pcbThickness        = 1.6; 
+standoffHeight      = 1.0; //-- How much the PCB needs to be raised from the base to leave room for solderings and whatnot
+standoffDiameter    = 7;
+standoffPinDiameter = 2.4;
+standoffHoleSlack   = 0.4;
+
+//===================================================================
+// *** PCBs ***
+// Printed Circuit Boards
+//-------------------------------------------------------------------
+//  Default origin =  yappCoordPCB : yappCoordBoxInside[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = name
+//    p(1) = length
+//    p(2) = width
+//    p(3) = posx
+//    p(4) = posy
+//    p(5) = Thickness
+//    p(6) = standoff_Height
+//    p(7) = standoff_Diameter
+//    p(8) = standoff_PinDiameter
+//   Optional:
+//    p(9) = standoff_HoleSlack (default to 0.4)
+
+//The following can be used to get PCB values elsewhere in the script - not in pcb definition. 
+//If "PCB Name" is omitted then "Main" is used
+//  pcbLength           --> pcbLength("PCB Name")
+//  pcbWidth            --> pcbWidth("PCB Name")
+//  pcbThickness        --> pcbThickness("PCB Name") 
+//  standoffHeight      --> standoffHeight("PCB Name") 
+//  standoffDiameter    --> standoffDiameter("PCB Name") 
+//  standoffPinDiameter --> standoffPinDiameter("PCB Name") 
+//  standoffHoleSlack   --> standoffHoleSlack("PCB Name") 
+
+pcb = 
+[
+  // Default Main PCB - DO NOT REMOVE the "Main" line.
+  ["Main",              pcbLength,pcbWidth,    0,0,    pcbThickness,  standoffHeight, standoffDiameter, standoffPinDiameter, standoffHoleSlack]
+];
+
+//-------------------------------------------------------------------                            
+//-- padding between pcb and inside wall
+paddingFront        = 2;
+paddingBack         = 2;
+paddingRight        = 2;
+paddingLeft         = 2;
+
+//-- Edit these parameters for your own box dimensions
+wallThickness       = 2.0;
+basePlaneThickness  = 1.5;
+lidPlaneThickness   = 1.5;
+
+//-- Total height of box = lidPlaneThickness 
+//                       + lidWallHeight 
+//--                     + baseWallHeight 
+//                       + basePlaneThickness
+//-- space between pcb and lidPlane :=
+//--      (bottonWallHeight+lidWallHeight) - (standoffHeight+pcbThickness)
+baseWallHeight      = 25;
+lidWallHeight       = 23;
+
+//-- ridge where base and lid off box can overlap
+//-- Make sure this isn't less than lidWallHeight
+ridgeHeight         = 5.0;
+ridgeSlack          = 0.2;
+roundRadius         = 3.0;
+
+
+// Set the layer height of your printer
+printerLayerHeight  = 0.2;
+
+
+//---------------------------
+//--     C O N T R O L     --
+//---------------------------
+// -- Render --
+renderQuality             = 8;          //-> from 1 to 32, Default = 8
+
+// --Preview --
+previewQuality            = 5;          //-> from 1 to 32, Default = 5
+showSideBySide            = true;       //-> Default = true
+onLidGap                  = 0;  // tip don't override to animate the lid opening
+colorLid                  = "YellowGreen";   
+alphaLid                  = 1;
+colorBase                 = "BurlyWood";
+alphaBase                 = 1;
+hideLidWalls              = false;      //-> Remove the walls from the lid : only if preview and showSideBySide=true 
+hideBaseWalls             = false;      //-> Remove the walls from the base : only if preview and showSideBySide=true  
+showOrientation           = true;       //-> Show the Front/Back/Left/Right labels : only in preview
+showPCB                   = false;      //-> Show the PCB in red : only in preview 
+showSwitches              = false;      //-> Show the switches (for pushbuttons) : only in preview 
+showButtonsDepressed      = false;      //-> Should the buttons in the Lid On view be in the pressed position
+showOriginCoordBox        = false;      //-> Shows red bars representing the origin for yappCoordBox : only in preview 
+showOriginCoordBoxInside  = false;      //-> Shows blue bars representing the origin for yappCoordBoxInside : only in preview 
+showOriginCoordPCB        = false;      //-> Shows blue bars representing the origin for yappCoordBoxInside : only in preview 
+showMarkersPCB            = false;      //-> Shows black bars corners of the PCB : only in preview 
+showMarkersCenter         = false;      //-> Shows magenta bars along the centers of all faces  
+inspectX                  = 0;          //-> 0=none (>0 from Back)
+inspectY                  = 0;          //-> 0=none (>0 from Right)
+inspectZ                  = 0;          //-> 0=none (>0 from Bottom)
+inspectXfromBack          = true;       //-> View from the inspection cut foreward
+inspectYfromLeft          = true;       //-> View from the inspection cut to the right
+inspectZfromBottom        = true;       //-> View from the inspection cut up
+//---------------------------
+//--     C O N T R O L     --
+//---------------------------
+
+//-------------------------------------------------------------------
+//-------------------------------------------------------------------
+// Start of Debugging config (used if not overridden in template)
+// ------------------------------------------------------------------
+// ------------------------------------------------------------------
+
+//==================================================================
+//  *** Shapes ***
+//------------------------------------------------------------------
+//  There are a view pre defines shapes and masks
+//  shapes:
+//      shapeIsoTriangle, shapeHexagon, shape6ptStar
+//
+//  masks:
+//      maskHoneycomb, maskHexCircles, maskBars, maskOffsetBars
+//
+//------------------------------------------------------------------
+// Shapes should be defined to fit into a 1x1 box (+/-0.5 in X and Y) - they will 
+// be scaled as needed.
+// defined as a vector of [x,y] vertices pairs.(min 3 vertices)
+// for example a triangle could be [yappPolygonDef,[[-0.5,-0.5],[0,0.5],[0.5,-0.5]]];
+// To see how to add your own shapes and mask see the YAPPgenerator program
+//------------------------------------------------------------------
+
+
+// Show sample of a Mask
+//SampleMask(maskHoneycomb);
+
+//===================================================================
+// *** PCB Supports ***
+// Pin and Socket standoffs 
+//-------------------------------------------------------------------
+//  Default origin =  yappCoordPCB : pcb[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = posx
+//    p(1) = posy
+//   Optional:
+//    p(2) = Height to bottom of PCB : Default = standoffHeight
+//    p(3) = PCB Gap : Default = -1 : Default for yappCoordPCB=pcbThickness, yappCoordBox=0
+//    p(4) = standoffDiameter    Default = standoffDiameter;
+//    p(5) = standoffPinDiameter Default = standoffPinDiameter;
+//    p(6) = standoffHoleSlack   Default = standoffHoleSlack;
+//    p(7) = filletRadius (0 = auto size)
+//    p(8) = Pin Length : Default = 0 -> PCB Gap + standoff_PinDiameter
+//             Indicated length of pin without the half sphere tip. 
+//             Example : pcbThickness() only leaves the half sphere tip above the PCB
+//    n(a) = { <yappBoth> | yappLidOnly | yappBaseOnly }
+//    n(b) = { <yappPin>, yappHole, yappTopPin } 
+//             yappPin = Pin on Base and Hole on Lid 
+//             yappHole = Hole on Both
+//             yappTopPin = Hole on Base and Pin on Lid
+//    n(c) = { yappAllCorners, yappFrontLeft | <yappBackLeft> | yappFrontRight | yappBackRight }
+//    n(d) = { <yappCoordPCB> | yappCoordBox | yappCoordBoxInside }
+//    n(e) = { yappNoFillet } : Removes the internal and external fillets and the Rounded tip on the pins
+//    n(f) = [yappPCBName, "XXX"] : Specify a PCB. Defaults to [yappPCBName, "Main"]
+//-------------------------------------------------------------------
+pcbStands = 
+[
+];
+
+
+//===================================================================
+//  *** Connectors ***
+//  Standoffs with hole through base and socket in lid for screw type connections.
+//-------------------------------------------------------------------
+//  Default origin = yappCoordBox: box[0,0,0]
+//  
+//  Parameters:
+//   Required:
+//    p(0) = posx
+//    p(1) = posy
+//    p(2) = pcbStandHeight
+//    p(3) = screwDiameter
+//    p(4) = screwHeadDiameter (don't forget to add extra for the fillet)
+//    p(5) = insertDiameter
+//    p(6) = outsideDiameter
+//   Optional:
+//    p(7) = PCB Gap : Default = -1 : Default for yappCoordPCB=pcbThickness, yappCoordBox=0
+//    p(8) = filletRadius : Default = 0/Auto(0 = auto size)
+//    n(a) = { <yappAllCorners>, yappFrontLeft | yappFrontRight | yappBackLeft | yappBackRight }
+//    n(b) = { <yappCoordBox> | yappCoordPCB |  yappCoordBoxInside }
+//    n(c) = { yappNoFillet }
+//    n(d) = { yappCountersink }
+//    n(e) = [yappPCBName, "XXX"] : Specify a PCB. Defaults to [yappPCBName, "Main"]
+//    n(f) = { yappThroughLid = changes the screwhole to the lid and the socket to the base}
+//-------------------------------------------------------------------
+connectors   =
+[
+];
+
+
+//===================================================================
+//  *** Cutouts ***
+//    There are 6 cutouts one for each surface:
+//      cutoutsBase (Bottom), cutoutsLid (Top), cutoutsFront, cutoutsBack, cutoutsLeft, cutoutsRight
+//-------------------------------------------------------------------
+//  Default origin = yappCoordBox: box[0,0,0]
+//
+//                        Required                Not Used        Note
+//----------------------+-----------------------+---------------+------------------------------------
+//  yappRectangle       | width, length         | radius        |
+//  yappCircle          | radius                | width, length |
+//  yappRoundedRect     | width, length, radius |               |     
+//  yappCircleWithFlats | width, radius         | length        | length=distance between flats
+//  yappCircleWithKey   | width, length, radius |               | width = key width length=key depth
+//  yappPolygon         | width, length         | radius        | yappPolygonDef object must be
+//                      |                       |               | provided
+//  yappRing            | width, length, radius |               | radius = outer radius, 
+//                      |                       |               | length = inner radius
+//                      |                       |               | width = connection between rings
+//                      |                       |               |   0 = No connectors
+//                      |                       |               |   positive = 2 connectors
+//                      |                       |               |   negative = 4 connectors
+//----------------------+-----------------------+---------------+------------------------------------
+//
+//  Parameters:
+//   Required:
+//    p(0) = from Back
+//    p(1) = from Left
+//    p(2) = width
+//    p(3) = length
+//    p(4) = radius
+//    p(5) = shape : { yappRectangle | yappCircle | yappPolygon | yappRoundedRect 
+//                     | yappCircleWithFlats | yappCircleWithKey }
+//  Optional:
+//    p(6) = depth : Default = 0/Auto : 0 = Auto (plane thickness)
+//    p(7) = angle : Default = 0
+//    n(a) = { yappPolygonDef } : Required if shape = yappPolygon specified -
+//    n(b) = { yappMaskDef } : If a yappMaskDef object is added it will be used as a mask 
+//                             for the cutout.
+//    n(c) = { [yappMaskDef, hOffset, vOffset, rotation] } : If a list for a mask is added 
+//                              it will be used as a mask for the cutout. With the Rotation 
+//                              and offsets applied. This can be used to fine tune the mask
+//                              placement within the opening.
+//    n(d) = { <yappCoordPCB> | yappCoordBox | yappCoordBoxInside }
+//    n(e) = { <yappOrigin>, yappCenter }
+//    n(f) = { <yappGlobalOrigin>, yappAltOrigin } // Only affects Top(lid), Back and Right Faces
+//    n(g) = [yappPCBName, "XXX"] : Specify a PCB. Defaults to [yappPCBName, "Main"]
+//    n(h) = { yappFromInside } Make the cut from the inside towards the outside
+//-------------------------------------------------------------------
+cutoutsBase = 
+[
+];
+
+cutoutsLid  = 
+[
+];
+
+cutoutsFront =  
+[
+];
+
+
+cutoutsBack = 
+[
+];
+
+cutoutsLeft =   
+[
+];
+
+cutoutsRight =  
+[
+];
+
+
+
+//===================================================================
+//  *** Snap Joins ***
+//-------------------------------------------------------------------
+//  Default origin = yappCoordBox: box[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = posx | posy
+//    p(1) = width
+//    p(2) = { yappLeft | yappRight | yappFront | yappBack } : one or more
+//   Optional:
+//    n(a) = { <yappOrigin>, yappCenter }
+//    n(b) = { yappSymmetric }
+//    n(c) = { yappRectangle } == Make a diamond shape snap
+//-------------------------------------------------------------------
+snapJoins   =   
+[
+];
+
+//===================================================================
+//  *** Box Mounts ***
+//  Mounting tabs on the outside of the box
+//-------------------------------------------------------------------
+//  Default origin = yappCoordBox: box[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = pos : position along the wall : [pos,offset] : vector for position and offset X.
+//                    Position is to center of mounting screw in leftmost position in slot
+//    p(1) = screwDiameter
+//    p(2) = width of opening in addition to screw diameter 
+//                    (0=Circular hole screwWidth = hole twice as wide as it is tall)
+//    p(3) = height
+//    n(a) = { yappLeft | yappRight | yappFront | yappBack } : one or more
+//   Optional:
+//    p(4) = filletRadius : Default = 0/Auto(0 = auto size)
+//    n(b) = { yappNoFillet }
+//    n(c) = { <yappBase>, yappLid }
+//    n(d) = { yappCenter } : shifts Position to be in the center of the opening instead of 
+//                            the left of the opening
+//    n(e) = { <yappGlobalOrigin>, yappAltOrigin } : Only affects Back and Right Faces
+//-------------------------------------------------------------------
+boxMounts =
+[
+];
+
+//===================================================================
+//  *** Light Tubes ***
+//-------------------------------------------------------------------
+//  Default origin = yappCoordPCB: PCB[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = posx
+//    p(1) = posy
+//    p(2) = tubeLength
+//    p(3) = tubeWidth
+//    p(4) = tubeWall
+//    p(5) = gapAbovePcb
+//    p(6) = { yappCircle | yappRectangle } : tubeType    
+//   Optional:
+//    p(7) = lensThickness (how much to leave on the top of the lid for the 
+//           light to shine through 0 for open hole : Default = 0/Open
+//    p(8) = Height to top of PCB : Default = standoffHeight+pcbThickness
+//    p(9) = filletRadius : Default = 0/Auto 
+//    n(a) = { <yappCoordPCB> | yappCoordBox | yappCoordBoxInside } 
+//    n(b) = { <yappGlobalOrigin>, yappAltOrigin }
+//    n(c) = { yappNoFillet }
+//    n(d) = [yappPCBName, "XXX"] : Specify a PCB. Defaults to [yappPCBName, "Main"]
+//-------------------------------------------------------------------
+lightTubes =
+[
+];
+
+//===================================================================
+//  *** Push Buttons ***
+//-------------------------------------------------------------------
+//  Default origin = yappCoordPCB: PCB[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = posx
+//    p(1) = posy
+//    p(2) = capLength 
+//    p(3) = capWidth 
+//    p(4) = capRadius 
+//    p(5) = capAboveLid
+//    p(6) = switchHeight
+//    p(7) = switchTravel
+//    p(8) = poleDiameter
+//   Optional:
+//    p(9) = Height to top of PCB : Default = standoffHeight + pcbThickness
+//    p(10) = { yappRectangle | yappCircle | yappPolygon | yappRoundedRect 
+//                    | yappCircleWithFlats | yappCircleWithKey } : Shape, Default = yappRectangle
+//    p(11) = angle : Default = 0
+//    p(12) = filletRadius          : Default = 0/Auto 
+//    p(13) = buttonWall            : Default = 2.0;
+//    p(14) = buttonPlateThickness  : Default= 2.5;
+//    p(15) = buttonSlack           : Default= 0.25;
+//    n(a) = { <yappCoordPCB> | yappCoordBox | yappCoordBoxInside } 
+//    n(b) = { <yappGlobalOrigin>,  yappAltOrigin }
+//    n(c) = { yappNoFillet }
+//    n(d) = [yappPCBName, "XXX"] : Specify a PCB. Defaults to [yappPCBName, "Main"]
+//-------------------------------------------------------------------
+pushButtons = 
+[
+];
+             
+//===================================================================
+//  *** Labels ***
+//-------------------------------------------------------------------
+//  Default origin = yappCoordBox: box[0,0,0]
+//
+//  Parameters:
+//   p(0) = posx
+//   p(1) = posy/z
+//   p(2) = rotation degrees CCW
+//   p(3) = depth : positive values go into case (Remove) negative valies are raised (Add)
+//   p(4) = { yappLeft | yappRight | yappFront | yappBack | yappLid | yappBaseyappLid } : plane
+//   p(5) = font
+//   p(6) = size
+//   p(7) = "label text"
+//  Optional:
+//   p(8) = Expand : Default = 0 : mm to expand text by (making it bolder) 
+//-------------------------------------------------------------------
+labelsPlane =
+[
+];
+
+
+//===================================================================
+//  *** Ridge Extension ***
+//    Extension from the lid into the case for adding split opening at various heights
+//-------------------------------------------------------------------
+//  Default origin = yappCoordBox: box[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = pos
+//    p(1) = width
+//    p(2) = height : Where to relocate the seam : yappCoordPCB = Above (positive) the PCB
+//                                                yappCoordBox = Above (positive) the bottom of the shell (outside)
+//   Optional:
+//    n(a) = { <yappOrigin>, yappCenter } 
+//    n(b) = { <yappCoordPCB> | yappCoordBox | yappCoordBoxInside }
+//    n(c) = { yappAltOrigin, <yappGlobalOrigin> } // Only affects Top(lid), Back and Right Faces
+//    n(d) = [yappPCBName, "XXX"] : Specify a PCB. Defaults to [yappPCBName, "Main"]
+//
+// Note: Snaps should not be placed on ridge extensions as they remove the ridge to place them.
+//-------------------------------------------------------------------
+ridgeExtLeft =
+[
+];
+
+ridgeExtRight =
+[
+];
+
+ridgeExtFront =
+[
+];
+
+ridgeExtBack =
+[
+];
+
+
+//===================================================================
+//  *** Display Mounts ***
+//    add a cutout to the lid with mounting posts for a display
+//-------------------------------------------------------------------
+//  Default origin = yappCoordBox: box[0,0,0]
+//
+//  Parameters:
+//   Required:
+//    p(0) = posx
+//    p(1) = posy
+//    p[2] : displayWidth = overall Width of the display module
+//    p[3] : displayHeight = overall Height of the display module
+//    p[4] : pinInsetH = Horizontal inset of the mounting hole
+//    p[5] : pinInsetV = Vertical inset of the mounting hole
+//    p[6] : pinDiameter,
+//    p[7] : postOverhang  = Extra distance on outside of pins for the display to sit on - pin Diameter is a good value
+//    p[8] : walltoPCBGap = Distance from the display PCB to the surface of the screen
+//    p[9] : pcbThickness  = Thickness of the display module PCB
+//    p[10] : windowWidth = opening width for the screen
+//    p[11] : windowHeight = Opening height for the screen
+//    p[12] : windowOffsetH = Horizontal offset from the center for the opening
+//    p[13] : windowOffsetV = Vertical offset from the center for the opening
+//    p[14] : bevel = Apply a 45degree bevel to the opening
+// Optionl:
+//    p[15] : rotation
+//    p[16] : snapDiameter : default = pinDiameter*2
+//    p[17] : lidThickness : default = lidPlaneThickness
+//    n(a) = { <yappOrigin>, yappCenter } 
+//    n(b) = { <yappCoordBox> | yappCoordPCB | yappCoordBoxInside }
+//    n(c) = { <yappGlobalOrigin>, yappAltOrigin } // Only affects Top(lid), Back and Right Faces
+//    n(d) = [yappPCBName, "XXX"] : Specify a PCB. Defaults to [yappPCBName, "Main"]
+//-------------------------------------------------------------------
+displayMounts =
+[
+];
+
+//========= HOOK functions ============================
+  
+// Hook functions allow you to add 3d objects to the case.
+// Lid/Base = Shell part to attach the object to.
+// Inside/Outside = Join the object from the midpoint of the shell to the inside/outside.
+// Pre = Attach the object Pre before doing Cutouts/Stands/Connectors. 
+
+
+//===========================================================
+// origin = box(0,0,0)
+module hookLidInside()
+{
+  //if (printMessages) echo("hookLidInside() ..");
+  
+} // hookLidInside()
+  
+
+//===========================================================
+// origin = box(0,0,shellHeight)
+module hookLidOutside()
+{
+  //if (printMessages) echo("hookLidOutside() ..");
+  
+} // hookLidOutside()
+
+//===========================================================
+//===========================================================
+// origin = box(0,0,0)
+module hookBaseInside()
+{
+  //if (printMessages) echo("hookBaseInside() ..");
+  
+} // hookBaseInside()
+
+//===========================================================
+// origin = box(0,0,0)
+module hookBaseOutside()
+{
+  //if (printMessages) echo("hookBaseOutside() ..");
+  
+} // hookBaseInside()
+
+// **********************************************************
+// **********************************************************
+// **********************************************************
+// *************** END OF TEMPLATE SECTION ******************
+// **********************************************************
+// **********************************************************
+// **********************************************************
+
+//---- This is where the magic happens ----
+YAPPgenerate();