Cargo.lock

@@ -229,6 +229,15 @@ version = "1.0.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "9330f8b2ff13f34540b44e946ef35111825727b38d33286ef986142615121801"
 
+[[package]]
+name = "ch1115"
+version = "0.1.2"
+dependencies = [
+ "display-interface",
+ "embedded-graphics-core",
+ "embedded-hal 1.0.0",
+]
+
 [[package]]
 name = "cobs"
 version = "0.3.0"
@@ -303,6 +312,7 @@ name = "creaturedex"
 version = "0.1.0"
 dependencies = [
  "base64 0.22.1",
+ "ch1115",
  "critical-section",
  "display-interface-spi",
  "embassy-executor",
@@ -311,6 +321,7 @@ dependencies = [
  "embedded-graphics-core",
  "embedded-hal 1.0.0",
  "embedded-hal-bus",
+ "embedded-hal-compat",
  "embedded-io 0.7.1",
  "esp-alloc",
  "esp-bootloader-esp-idf",
@@ -322,6 +333,7 @@ dependencies = [
  "log",
  "ndef",
  "pn532",
+ "sh1106",
  "ssd1306",
 ]
 
@@ -957,6 +969,17 @@ dependencies = [
  "embedded-hal 1.0.0",
 ]
 
+[[package]]
+name = "embedded-hal-compat"
+version = "0.13.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "08ecac72f6be75ad2d4809c9f07d45502e2e5c9a4e9579077f28d7135de81df3"
+dependencies = [
+ "embedded-hal 0.2.7",
+ "embedded-hal 1.0.0",
+ "nb 1.1.0",
+]
+
 [[package]]
 name = "embedded-io"
 version = "0.4.0"
@@ -3116,6 +3139,16 @@ dependencies = [
  "unsafe-libyaml",
 ]
 
+[[package]]
+name = "sh1106"
+version = "0.5.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "dc12a0563ec9b3b1f99b1f64613581ebbade1347416a34766564f406c15d1bf3"
+dependencies = [
+ "embedded-graphics-core",
+ "embedded-hal 0.2.7",
+]
+
 [[package]]
 name = "sharded-slab"
 version = "0.1.7"

Cargo.toml

@@ -42,8 +42,14 @@ embedded-graphics-core = "0.4.1"
 base64 = { version = "0.22", default-features = false, features = ["alloc"] }
 pn532 = "0.5.0"
 ndef = "0.5.0"
+ch1115 = { version = "0.1.2", features = ["graphics"] }
+sh1106 = "0.5.0"
+embedded-hal-compat = "0.13.0"
 
 
+[patch.crates-io]
+ch1115 = { path = "./ch1115" }
+
 
 
 # For fine tuning these settings, please refer to https://doc.rust-lang.org/cargo/reference/profiles.html
@@ -60,4 +66,4 @@ opt-level     = 's'
 
 [features]
 default = []
-wokwi = []
+wokwi = []

src/bin/experiment_ch1115.rs

@@ -0,0 +1,106 @@
+#![no_std]
+#![no_main]
+#![deny(
+    clippy::mem_forget,
+    reason = "mem::forget is generally not safe to do with esp_hal types, especially those \
+    holding buffers for the duration of a data transfer."
+)]
+
+use ch1115::Ch1115;
+use core::cell::RefCell;
+use creaturedex::display::shared_bus::SharedPin;
+use embassy_executor::Spawner;
+use embassy_time::Timer;
+use embedded_graphics::pixelcolor::BinaryColor;
+use embedded_graphics::{
+    mono_font::{MonoTextStyle, ascii::FONT_6X10},
+    prelude::*,
+    text::Text,
+};
+use esp_hal::clock::CpuClock;
+use esp_hal::delay::Delay;
+use esp_hal::gpio::{Level, Output, OutputConfig};
+use esp_hal::spi::Mode;
+use esp_hal::spi::master::{Config as SpiConfig, Spi};
+use esp_hal::time::Rate;
+use esp_hal::timer::timg::TimerGroup;
+use log::error;
+
+#[panic_handler]
+fn panic(panic_info: &core::panic::PanicInfo) -> ! {
+    error!("{}", panic_info);
+    loop {}
+}
+
+extern crate alloc;
+
+esp_bootloader_esp_idf::esp_app_desc!();
+
+#[esp_rtos::main]
+async fn main(_spawner: Spawner) {
+    esp_println::logger::init_logger_from_env();
+
+    let config = esp_hal::Config::default().with_cpu_clock(CpuClock::max());
+    let peripherals = esp_hal::init(config);
+
+    // The following GPIO pins are in use by some feature of the module and should not be used.
+    let _ = peripherals.GPIO27;
+    let _ = peripherals.GPIO28;
+    let _ = peripherals.GPIO29;
+    let _ = peripherals.GPIO30;
+    let _ = peripherals.GPIO31;
+    let _ = peripherals.GPIO32;
+    let _ = peripherals.GPIO33;
+    let _ = peripherals.GPIO34;
+
+    esp_alloc::heap_allocator!(#[esp_hal::ram(reclaimed)] size: 73744);
+
+    let mut delay = Delay::new();
+
+    let timg0 = TimerGroup::new(peripherals.TIMG0);
+    let sw_interrupt =
+        esp_hal::interrupt::software::SoftwareInterruptControl::new(peripherals.SW_INTERRUPT);
+    esp_rtos::start(timg0.timer0, sw_interrupt.software_interrupt0);
+
+    let spi = peripherals.SPI2;
+    let sck = peripherals.GPIO36;
+    let mosi = peripherals.GPIO35;
+    let cs = peripherals.GPIO13;
+    let reset = peripherals.GPIO10;
+    let dc = peripherals.GPIO12;
+    let miso = peripherals.GPIO37;
+
+    let cs = Output::new(cs, Level::High, OutputConfig::default());
+    let dc = Output::new(dc, Level::Low, OutputConfig::default());
+    let reset = Output::new(reset, Level::High, OutputConfig::default());
+
+    let spi = Spi::new(
+        spi,
+        SpiConfig::default()
+            .with_frequency(Rate::from_khz(5000))
+            .with_mode(Mode::_0),
+    )
+    .unwrap()
+    .with_sck(sck)
+    .with_mosi(mosi)
+    .with_miso(miso);
+
+    let spi = RefCell::new(spi);
+    let spi_dev = embedded_hal_bus::spi::RefCellDevice::new(&spi, cs, delay).unwrap();
+    let interface = display_interface_spi::SPIInterface::new(spi_dev, dc);
+
+    let mut display = Ch1115::new(interface, reset, ch1115::Size128x64);
+    display.init(&mut delay).unwrap();
+
+
+    loop {
+        log::info!("Init finished");
+        // let text_style = MonoTextStyle::new(&FONT_6X10, BinaryColor::On);
+        // Text::new("Hello OLED", Point::new(10, 20), text_style)
+        //     .draw(&mut display)
+        //     .unwrap();
+
+        // display.flush().unwrap();
+        Timer::after_millis(1000).await;
+    }
+}

src/bin/experiment_sh1106.rs

@@ -0,0 +1,121 @@
+#![no_std]
+#![no_main]
+#![deny(
+    clippy::mem_forget,
+    reason = "mem::forget is generally not safe to do with esp_hal types, especially those \
+    holding buffers for the duration of a data transfer."
+)]
+
+use embassy_executor::Spawner;
+use embassy_time::Timer;
+use embedded_graphics::pixelcolor::BinaryColor;
+use embedded_graphics::{
+    mono_font::{MonoTextStyle, ascii::FONT_6X10},
+    prelude::*,
+    text::Text,
+};
+use embedded_hal_compat::ReverseCompat;
+use esp_hal::clock::CpuClock;
+use esp_hal::delay::Delay;
+use esp_hal::gpio::{Level, Output, OutputConfig};
+use esp_hal::spi::Mode;
+use esp_hal::spi::master::{Config as SpiConfig, Spi};
+use esp_hal::time::Rate;
+use esp_hal::timer::timg::TimerGroup;
+use log::error;
+
+#[panic_handler]
+fn panic(panic_info: &core::panic::PanicInfo) -> ! {
+    error!("{}", panic_info);
+    loop {}
+}
+
+extern crate alloc;
+
+esp_bootloader_esp_idf::esp_app_desc!();
+
+// This creates a defaembedded_hal_compatedReverseCompat::reverse(Output::new(cs,Level::High,OutputConfig::default()))vel::High,OutputConfig::default())) more information see: embedded_hal_compat::ForwardCompat::forward(Spi::new(spi,SpiConfig::default().with_frequency(Rate::from_khz(100)).with_mode(Mode::_0),).unwrap().with_sck(sck).with_mosi(mosi))rward(Spi::new(spi,SpiConfig::default().with_frequency(Rate::from_khz(100)).with_mode(Mode::_0),).unwrap().with_sck(sck).with_mosi(mosi)) to allocate larger buffers etc. in main"
+#[esp_rtos::main]
+async fn main(_spawner: Spawner) {
+    esp_println::logger::init_logger_from_env();
+
+    let config = esp_hal::Config::default().with_cpu_clock(CpuClock::max());
+    let peripherals = esp_hal::init(config);
+
+    // The following GPIO pins are in use by some feature of the module and should not be used.
+    let _ = peripherals.GPIO27;
+    let _ = peripherals.GPIO28;
+    let _ = peripherals.GPIO29;
+    let _ = peripherals.GPIO30;
+    let _ = peripherals.GPIO31;
+    let _ = peripherals.GPIO32;
+    let _ = peripherals.GPIO33;
+    let _ = peripherals.GPIO34;
+
+    esp_alloc::heap_allocator!(#[esp_hal::ram(reclaimed)] size: 73744);
+
+    let delay = Delay::new();
+
+    let timg0 = TimerGroup::new(peripherals.TIMG0);
+    let sw_interrupt =
+        esp_hal::interrupt::software::SoftwareInterruptControl::new(peripherals.SW_INTERRUPT);
+    esp_rtos::start(timg0.timer0, sw_interrupt.software_interrupt0);
+
+    let spi = peripherals.SPI2;
+    let sck = peripherals.GPIO36;
+    let mosi = peripherals.GPIO35;
+    let cs = peripherals.GPIO13;
+    let reset = peripherals.GPIO10;
+    let dc = peripherals.GPIO12;
+    let miso = peripherals.GPIO37;
+
+    let cs = Output::new(cs, Level::High, OutputConfig::default()).reverse_cell();
+    let dc = Output::new(dc, Level::Low, OutputConfig::default()).reverse_cell();
+    let mut reset = Output::new(reset, Level::High, OutputConfig::default());
+
+    let spi = Spi::new(
+        spi,
+        SpiConfig::default()
+            .with_frequency(Rate::from_khz(5000))
+            .with_mode(Mode::_0),
+    )
+    .unwrap()
+    .with_sck(sck)
+    .with_mosi(mosi)
+    .with_miso(miso)
+    .reverse();
+
+    let mut display: sh1106::mode::GraphicsMode<_> =
+        sh1106::Builder::new().connect_spi(spi, dc, cs).into();
+
+    display.init().unwrap();
+
+    // Hard reset the OLED
+    reset.set_high();
+    delay.delay_millis(1);
+    reset.set_low();
+    delay.delay_millis(10);
+    reset.set_high();
+
+    display.flush().unwrap();
+
+    display.set_pixel(10, 20, 1);
+
+    display.flush().unwrap();
+
+    let mut oled = display;
+
+    oled.clear();
+
+    let text_style = MonoTextStyle::new(&FONT_6X10, BinaryColor::On);
+    Text::new("Hello OLED", Point::new(10, 20), text_style)
+        .draw(&mut oled)
+        .unwrap();
+
+    oled.flush().unwrap();
+
+    loop {
+        log::info!("Init finished");
+        Timer::after_millis(1000).await;
+    }
+}

src/bin/experiment_ssd1306.rs

@@ -0,0 +1,122 @@
+#![no_std]
+#![no_main]
+#![deny(
+    clippy::mem_forget,
+    reason = "mem::forget is generally not safe to do with esp_hal types, especially those \
+    holding buffers for the duration of a data transfer."
+)]
+#![deny(clippy::large_stack_frames)]
+
+use embassy_executor::Spawner;
+use embassy_time::Timer;
+use embedded_graphics::draw_target::DrawTarget;
+use embedded_graphics::pixelcolor::BinaryColor;
+use embedded_graphics::text::Text;
+use embedded_graphics::{
+    mono_font::{MonoTextStyle, ascii::FONT_6X10},
+    prelude::*,
+};
+
+use core::cell::RefCell;
+use esp_hal::clock::CpuClock;
+use esp_hal::delay::Delay;
+use esp_hal::gpio::{Level, Output, OutputConfig};
+use esp_hal::spi::Mode;
+use esp_hal::spi::master::{Config as SpiConfig, Spi};
+use esp_hal::time::Rate;
+use esp_hal::timer::timg::TimerGroup;
+use log::error;
+use ssd1306::Ssd1306;
+use ssd1306::mode::DisplayConfig;
+use ssd1306::rotation::DisplayRotation;
+use ssd1306::size::DisplaySize128x64;
+
+#[panic_handler]
+fn panic(panic_info: &core::panic::PanicInfo) -> ! {
+    error!("{}", panic_info);
+    loop {}
+}
+
+extern crate alloc;
+
+esp_bootloader_esp_idf::esp_app_desc!();
+
+// This creates a defaembedded_hal_compatedReverseCompat::reverse(Output::new(cs,Level::High,OutputConfig::default()))vel::High,OutputConfig::default())) more information see: embedded_hal_compat::ForwardCompat::forward(Spi::new(spi,SpiConfig::default().with_frequency(Rate::from_khz(100)).with_mode(Mode::_0),).unwrap().with_sck(sck).with_mosi(mosi))rward(Spi::new(spi,SpiConfig::default().with_frequency(Rate::from_khz(100)).with_mode(Mode::_0),).unwrap().with_sck(sck).with_mosi(mosi)) to allocate larger buffers etc. in main"
+#[esp_rtos::main]
+async fn main(_spawner: Spawner) {
+    esp_println::logger::init_logger_from_env();
+
+    let config = esp_hal::Config::default().with_cpu_clock(CpuClock::max());
+    let peripherals = esp_hal::init(config);
+
+    // The following GPIO pins are in use by some feature of the module and should not be used.
+    let _ = peripherals.GPIO27;
+    let _ = peripherals.GPIO28;
+    let _ = peripherals.GPIO29;
+    let _ = peripherals.GPIO30;
+    let _ = peripherals.GPIO31;
+    let _ = peripherals.GPIO32;
+    let _ = peripherals.GPIO33;
+    let _ = peripherals.GPIO34;
+
+    esp_alloc::heap_allocator!(#[esp_hal::ram(reclaimed)] size: 73744);
+
+    let mut delay = Delay::new();
+
+    let timg0 = TimerGroup::new(peripherals.TIMG0);
+    let sw_interrupt =
+        esp_hal::interrupt::software::SoftwareInterruptControl::new(peripherals.SW_INTERRUPT);
+    esp_rtos::start(timg0.timer0, sw_interrupt.software_interrupt0);
+
+    let spi = peripherals.SPI2;
+    let sck = peripherals.GPIO36;
+    let mosi = peripherals.GPIO35;
+    let cs = peripherals.GPIO13;
+    let reset = peripherals.GPIO10;
+    let dc = peripherals.GPIO12;
+    let miso = peripherals.GPIO37;
+
+    let cs = Output::new(cs, Level::High, OutputConfig::default());
+    let dc = Output::new(dc, Level::Low, OutputConfig::default());
+    let mut reset = Output::new(reset, Level::High, OutputConfig::default());
+
+    let spi = Spi::new(
+        spi,
+        SpiConfig::default()
+            .with_frequency(Rate::from_khz(5000))
+            .with_mode(Mode::_0),
+    )
+    .unwrap()
+    .with_sck(sck)
+    .with_mosi(mosi)
+    .with_miso(miso);
+
+    let spi = RefCell::new(spi);
+    let spi_dev = embedded_hal_bus::spi::RefCellDevice::new(&spi, cs, delay).unwrap();
+    let interface = display_interface_spi::SPIInterface::new(spi_dev, dc);
+    let mut display = Ssd1306::new(
+        interface,
+        DisplaySize128x64,
+        DisplayRotation::Rotate0,
+    )
+    .into_buffered_graphics_mode();
+
+    display.reset(&mut reset, &mut delay).unwrap();
+    display.init().unwrap();
+    display.clear(BinaryColor::Off).unwrap();
+
+
+    let mut oled = display;
+
+    let text_style = MonoTextStyle::new(&FONT_6X10, BinaryColor::On);
+    Text::new("Hello OLED", Point::new(10, 20), text_style)
+        .draw(&mut oled)
+        .unwrap();
+
+    oled.flush().unwrap();
+
+    loop {
+        log::info!("Init finished");
+        Timer::after_millis(1000).await;
+    }
+}

src/bin/main.rs

@@ -10,7 +10,6 @@
 use creaturedex::card::mock::{MOCK_PAYLOAD, MOCK_PAYLOAD2};
 use creaturedex::display::shared_bus::init_dual_displays;
 
-
 use creaturedex::display::views::card_view::render_nfc_payload;
 use creaturedex::drivers::nfc_pn532::NfcPn532Driver;
 use creaturedex::navigation::input::init_navigation_button;
@@ -18,17 +17,17 @@ use creaturedex::navigation::state::NavigationState;
 use creaturedex::network::wifi::setup_wifi;
 use embassy_executor::Spawner;
 use embassy_time::Timer;
-use embedded_graphics::{
-        mono_font::{ascii::FONT_6X10, MonoTextStyle},
-        prelude::*,
-        text::Text,
-    };
 use embedded_graphics::draw_target::DrawTarget;
 use embedded_graphics::pixelcolor::{BinaryColor, Rgb565};
 use embedded_graphics::prelude::RgbColor;
-use esp_hal::time::Duration;
+use embedded_graphics::{
+    mono_font::{MonoTextStyle, ascii::FONT_6X10},
+    prelude::*,
+    text::Text,
+};
 use esp_hal::clock::CpuClock;
 use esp_hal::delay::Delay;
+use esp_hal::time::Duration;
 use esp_hal::timer::timg::TimerGroup;
 use log::error;
 
@@ -81,7 +80,7 @@ async fn main(spawner: Spawner) {
         peripherals.GPIO35, // mosi
         peripherals.GPIO37, // miso
         peripherals.GPIO11, // primary cs
-        peripherals.GPIO5,  // oled cs
+        peripherals.GPIO13, // oled cs
         peripherals.GPIO10, // shared reset
         peripherals.GPIO12, // shared dc
         &mut delay,
@@ -97,11 +96,14 @@ async fn main(spawner: Spawner) {
     Text::new("Hello OLED", Point::new(10, 20), text_style)
         .draw(&mut oled)
         .unwrap();
-
     oled.flush().unwrap();
 
+    let text_style = MonoTextStyle::new(&FONT_6X10, Rgb565::WHITE);
+    display.clear_screen(0).unwrap();
+    Text::new("Hello OLED", Point::new(10, 20), text_style).draw(&mut display).unwrap();
 
-    let mut nfc_driver  = NfcPn532Driver::new(peripherals.I2C0, peripherals.GPIO17, peripherals.GPIO18);
+    let mut nfc_driver =
+        NfcPn532Driver::new(peripherals.I2C0, peripherals.GPIO17, peripherals.GPIO18);
     let timeout = Duration::from_millis(1000);
     if nfc_driver.configure_sam(timeout).is_ok() {
         log::info!("NFC SAM configuration successful");
@@ -109,24 +111,7 @@ async fn main(spawner: Spawner) {
         log::error!("NFC SAM configuration failed");
     }
 
-
-    log::info!("Setup complete, entering main loop");
     loop {
-        if let Ok(card_data) = nfc_driver.read_card_data() {
-            log::info!("NFC Card Read: {:?}", card_data);
-        }
-
-        if button1.is_low() {
-            log::info!("Button pressed!");
-            display.clear(Rgb565::BLACK).unwrap();
-            let payload = if nav_state.toggle_payload() {
-                &MOCK_PAYLOAD
-            } else {
-                &MOCK_PAYLOAD2
-            };
-
-            render_nfc_payload(&mut display, payload);
-        }
         Timer::after_millis(10).await;
     }
 }