.cargo/config.toml

@@ -3,6 +3,7 @@ runner = "espflash flash --monitor --chip esp32s3"
 
 [env]
 ESP_LOG="info"
+WM_CONN = '{"ssid": "Wokwi-GUEST", "psk": "", "data": {}}'
 
 [build]
 rustflags = [

Cargo.toml

@@ -12,6 +12,7 @@ path = "./src/bin/main.rs"
 esp-hal = { version = "~1.1.0", features = ["esp32s3", "log-04", "unstable"] }
 
 esp-rtos = { version = "0.3.0", features = [
+  "embassy",
   "esp-alloc",
   "esp-radio",
   "esp32s3",
@@ -23,28 +24,14 @@ log                    = "0.4.27"
 
 critical-section = "1.2.0"
 embedded-io = "0.7.1"
+embassy-executor = { version = "0.10.0", default-features = false }
+embassy-time = { version = "0.5.1", default-features = false }
 esp-alloc = "0.10.0"
-esp-println = { version = "0.17.0", features = ["esp32s3", "log-04"] }
+esp-hal-wifimanager = { git = "https://github.com/InvisibleUSA/esp-hal-wifimanager", default-features = false, features = [
-esp-radio = { version = "0.18.0", features = [
+  "ap",
-  "esp-alloc",
   "esp32s3",
-  "log-04",
-  "unstable",
-  "wifi",
-] }
-smoltcp = { version = "0.13.0", default-features = false, features = [
-  "log",
-  "medium-ethernet",
-  "multicast",
-  "proto-dhcpv4",
-  "proto-dns",
-  "proto-ipv4",
-  "socket-dns",
-  "socket-icmp",
-  "socket-raw",
-  "socket-tcp",
-  "socket-udp",
 ] }
+esp-println = { version = "0.17.0", features = ["esp32s3", "log-04"] }
 display-interface-spi = "0.5.0"
 ili9341 = "0.6.0"
 embedded-hal = "1.0.0"
@@ -64,3 +51,7 @@ codegen-units = 1     # LLVM can perform better optimizations using a single thr
 debug         = 2     # prefer slower builds but better debugging experience
 lto           = 'fat'
 opt-level     = 's'
+
+[features]
+default = []
+wokwi = []

diagram.json

@@ -1,5 +1,6 @@
 {
   "version": 1,
+  "author": "CreatureDex",
   "editor": "wokwi",
   "parts": [
     { "type": "board-esp32-s3-devkitc-1", "id": "esp1", "top": 67.2, "left": -263.96, "attrs": {} },
@@ -26,6 +27,8 @@
     }
   ],
     "connections": [
+    [ "esp1:TX", "$serialMonitor:RX", "", [] ], 
+    [ "esp1:RX", "$serialMonitor:TX", "", [] ],
     [ "lcd1:VCC", "esp1:3V3", "red", [ "v19.2", "h-57.6", "v-105.6", "h-124.95" ] ],
     [ "lcd1:GND", "esp1:GND.2", "black", [ "v28.8", "h-76.8", "v-76.8" ] ],
     [ "lcd1:CS", "esp1:11", "orange", [ "v0" ] ],

src/bin/main.rs

@@ -7,6 +7,8 @@
 )]
 #![deny(clippy::large_stack_frames)]
 
+use embassy_executor::Spawner;
+use embassy_time::Timer;
 use display_interface_spi::SPIInterface;
 use embedded_graphics::Drawable;
 use embedded_graphics::mono_font::MonoTextStyle;
@@ -22,13 +24,11 @@ use esp_hal::delay::Delay;
 use esp_hal::gpio::Level;
 use esp_hal::gpio::Output;
 use esp_hal::gpio::OutputConfig;
-use esp_hal::main;
 use esp_hal::spi::{
     Mode,
     master::{Config, Spi},
 };
 use esp_hal::time::Rate;
-use esp_hal::time::{Duration, Instant};
 use esp_hal::timer::timg::TimerGroup;
 use ili9341::Ili9341;
 use ili9341::Orientation;
@@ -46,15 +46,96 @@ extern crate alloc;
 // For more information see: <https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-reference/system/app_image_format.html#application-description>
 esp_bootloader_esp_idf::esp_app_desc!();
 
+
+#[cfg(not(feature = "wokwi"))]
+async fn setup_wifi(
+    wifi: esp_hal::peripherals::WIFI<'static>, 
+    flash: esp_hal::peripherals::FLASH<'static>, 
+    spawner: &Spawner,
+) {
+    let nvs = esp_hal_wifimanager::Nvs::new(0x9000, 0x6000, flash).unwrap();
+
+    let mut wm_settings = esp_hal_wifimanager::WmSettings::default();
+
+    wm_settings.ssid.clear();
+    _ = core::fmt::write(
+        &mut wm_settings.ssid,
+        format_args!("CreatureDex-{:X}", esp_hal_wifimanager::get_efuse_mac()),
+    );
+
+    wm_settings.wifi_conn_timeout = 30000;
+    wm_settings.esp_reset_timeout = Some(300000); // 5min
+
+    let wifi_res = esp_hal_wifimanager::init_wm(
+        wm_settings,
+        spawner,
+        Some(&nvs),
+        wifi,
+        None,
+    )
+    .await;
+
+    log::info!("wifi_res: {wifi_res:?}");
+}
+
+#[cfg(feature = "wokwi")]
+async fn setup_wifi(
+    wifi: esp_hal::peripherals::WIFI<'static>, 
+    flash: esp_hal::peripherals::FLASH<'static>, 
+    spawner: &Spawner,
+) {
+    log::info!("Wokwi mode active: pre-seeding WiFi Manager with Wokwi credentials");
+
+    // Preload connection data so init_wm can connect immediately without AP setup.
+    let nvs = match esp_hal_wifimanager::Nvs::new(0x9000, 0x6000, flash) {
+        Ok(nvs) => nvs,
+        Err(e) => {
+            log::error!("Failed to initialize NVS for Wokwi: {e:?}");
+            return;
+        }
+    };
+
+    if let Err(e) = nvs
+        .set(
+            esp_hal_wifimanager::WIFI_NVS_KEY,
+            "{\"ssid\":\"Wokwi-GUEST\",\"psk\":\"\",\"data\":{}}",
+        )
+        .await
+    {
+        log::error!("Failed to store Wokwi WiFi config in NVS: {e:?}");
+        return;
+    }
+    
+    let mut wm_settings = esp_hal_wifimanager::WmSettings::default();
+    
+    // Wokwi simulation uses a default open network called "Wokwi-GUEST"
+    wm_settings.ssid.clear();
+    _ = core::fmt::write(&mut wm_settings.ssid, format_args!("Wokwi-GUEST"));
+    
+    wm_settings.wifi_conn_timeout = 30000;
+    
+    // Initialize Wi-Fi connection through WiFi Manager using the pre-seeded NVS data.
+    let wifi_res = esp_hal_wifimanager::init_wm(
+        wm_settings,
+        spawner,
+        Some(&nvs),
+        wifi,
+        None,
+    )
+    .await;
+
+    log::info!("Wokwi wifi_res: {wifi_res:?}");
+}
+
 #[allow(
     clippy::large_stack_frames,
     reason = "it's not unusual to allocate larger buffers etc. in main"
 )]
-#[main]
+#[esp_rtos::main]
-fn main() -> ! {
+async fn main(spawner: Spawner) {
     // generator version: 1.3.0
     // generator parameters: --chip esp32s3 -o esp32s3-wroom-1-octal-psram -o unstable-hal -o alloc -o wifi -o log -o wokwi -o neovim -o vscode -o esp
-
+    
     esp_println::logger::init_logger_from_env();
 
     let config = esp_hal::Config::default().with_cpu_clock(CpuClock::max());
@@ -85,9 +166,7 @@ fn main() -> ! {
     let sw_interrupt =
         esp_hal::interrupt::software::SoftwareInterruptControl::new(peripherals.SW_INTERRUPT);
     esp_rtos::start(timg0.timer0, sw_interrupt.software_interrupt0);
-    let (mut _wifi_controller, _interfaces) =
+    
-        esp_radio::wifi::new(peripherals.WIFI, Default::default())
-            .expect("Failed to initialize Wi-Fi controller");
 
     let spi_bus = Spi::new(
         peripherals.SPI2,
@@ -124,10 +203,13 @@ fn main() -> ! {
         .draw(&mut display)
         .unwrap();
 
+    setup_wifi(peripherals.WIFI, peripherals.FLASH, &spawner).await;
+
+    log::info!("Setup complete, entering main loop");
+
     loop {
         info!("Hello world!");
-        let delay_start = Instant::now();
+        Timer::after_millis(500).await;
-        while delay_start.elapsed() < Duration::from_millis(500) {}
     }
 
     // for inspiration have a look at the examples at https://github.com/esp-rs/esp-hal/tree/esp-hal-v1.1.0/examples