wifi: fix issue with initialization

tertiary display: implement feature flag to disable
common: remove debug from cargo config, use ESP_LOG="creaturedex:debug"

model/combined.scad

@@ -2,8 +2,8 @@ include <common.scad>
 use <left-half.scad>
 use <right-half.scad>
 
-left_half();
-right_half();
+left_half_creaturedex();
+right_half_creaturedex();
 
 #union() {
   right_half_components();

model/common.scad

@@ -61,6 +61,7 @@ module main_display(pin_header = false) {
         left(sd_inset)
           cuboid([sd_width, sd_length, sd_height], anchor=TOP + RIGHT + FRONT);
 
+      if (pin_header)
         position(BOTTOM + LEFT)
           xrot(180)
             pin_header(14, spin=90, anchor=BOTTOM + BACK);

model/left-half.scad

@@ -1,12 +1,226 @@
+include <BOSL2/std.scad>
 include <common.scad>
 
-module left_half_components() {
-    cube([1,1,1]);
+module left_half_orig() {
+  translate(BASE_MODEL_TRANSLATE) scale(BASE_MODEL_SCALE) import(file="left-half.3mf");
 }
 
-module left_half() {
-    translate(BASE_MODEL_TRANSLATE) scale(BASE_MODEL_SCALE) import(file = "left-half.3mf");
+BASE_MODEL_SCALE = 1.1;
+// Bounds: ~ [128.62, 185.46, 35.2]
+LEFT_HALF_BOUNDING_BOX = BASE_MODEL_SCALE * [116.93, 168.6, 32];
+
+w = LEFT_HALF_BOUNDING_BOX.x;
+l = LEFT_HALF_BOUNDING_BOX.y;
+max_h = LEFT_HALF_BOUNDING_BOX.z;
+
+// Proportional heights based on a 4.5 unit total scale
+base_h = max_h * (2.0 / 4.5);
+border_h = max_h * (2.5 / 4.5);
+top_h = max_h * (3.5 / 4.5);
+sphere_r = max_h - top_h;
+
+recess_h = 3;
+
+bump_height = 10;
+faceplate_thickness = 2;
+wall = 5;
+
+top_bump_width_big = 55;
+top_bump_width_small = 35;
+
+hinge_thickness = 22;
+
+/// Builds the top bump.
+module top_bump(height, extra_width = 0, inverted = false, wall = 2, anchor = CENTER, spin = 0, orient = UP) {
+  width_big = top_bump_width_big;
+  width_small = top_bump_width_small;
+
+  // Assuming 'w' is your base width defined in the outer scope.
+  // Lock the left side to the base width, add extra_width only to the right.
+  left_x = -w / 2;
+  right_x = (w / 2) + extra_width;
+
+  top_path = back(
+    // center the path around the origin
+    width_big / 2, [
+      [right_x, 0], // Index 0, top-right
+      [left_x, 0], // Index 1, top-left
+      [left_x, -width_big], // Index 2, bottom-left
+      [left_x / 2 + 20, -width_big], // Index 3, bottom-center-left
+      [0, -width_small], // Index 4, middle-center
+      [right_x, -width_small], // Index 5, bottom-right
+    ]
+  );
+
+  radii_list = [5, 5, 5, 15, 5, 5];
+
+  top_poly = round_corners(top_path, radius=radii_list);
+  inner_poly = offset(top_poly, delta=-wall);
+
+  // The new total width
+  total_width = w + extra_width;
+  part_size = [total_width, width_big, height];
+
+  // The geometric center of the asymmetric shape is shifted to the right
+  part_offset = [extra_width / 2, 0, 0];
+
+  // Removed the `right(extra_width)` translation here.
+  // Added `offset` so BOSL2 knows the bounding box isn't centered at [0,0,0], 
+  // keeping the CENTER anchor exactly on your original origin point.
+  attachable(anchor, spin, orient, size=part_size, offset=part_offset) {
+    if (inverted) {
+      down(wall / 2)
+        linear_sweep(inner_poly, height=height - wall + EPS, center=true);
+    } else {
+      diff("empty") {
+        linear_sweep(top_poly, height=height, center=true) {
+          attach(TOP)
+            tag("empty")
+              down(wall)
+                left(wall / 4) // (Leaving your original shift here)
+                  linear_sweep(inner_poly, height=height - wall + EPS, anchor=TOP);
+        }
+      }
+    }
+
+    children();
+  }
 }
 
-left_half();
-#left_half_components();
+module top_bump_skirt(height = 5) {
+  intersection() {
+    diff("heel_holes") {
+      tag("heel_holes")
+        down(EPS / 2)
+          top_bump(height=height * 2 + EPS, wall=wall, inverted=true, anchor=FRONT + BOTTOM);
+      top_bump(height=height, wall=wall, anchor=FRONT + BOTTOM);
+    }
+    down(EPS / 2)
+      cuboid([w, wall + (top_bump_width_big - top_bump_width_small) + EPS, height * 2 + EPS], anchor=FRONT + BOTTOM);
+  }
+}
+
+module top_bump_side_extension(width, height = 5) {
+  intersection() {
+    diff("heel_holes") {
+      tag("heel_holes")
+        down(EPS / 2)
+          top_bump(height=height * 2 + EPS, wall=wall, inverted=true, anchor=RIGHT + TOP + BACK);
+      top_bump(height=height, wall=wall, anchor=RIGHT + TOP + BACK);
+    }
+    back(EPS / 2)
+      up(EPS / 2)
+        cuboid([width, top_bump_width_small + EPS, height * 2 + EPS], anchor=RIGHT + TOP + BACK);
+  }
+}
+
+module top_bump_big_sphere(diameter, ring_extra_diameter, ring_height) {
+  zcyl(d=diameter + ring_extra_diameter, h=ring_height, anchor=BOTTOM)
+    position(TOP)
+      top_half() sphere(diameter / 2);
+}
+
+module top_bump_small_spheres(diameter, spacing) {
+  top_half() {
+    left(spacing) sphere(r=diameter / 2, anchor=CENTER);
+    sphere(r=diameter / 2, anchor=CENTER);
+    right(spacing) sphere(r=diameter / 2, anchor=CENTER);
+  }
+}
+
+/// Hinges to attach the right to the left (=this) half.
+/// Origin is at the bottom left front corner.
+module hinges(joint_axis_length = 80, hinge_thickness = 22) {
+  hinge_inset = 10;
+  hinge_inset_diameter = 6;
+
+  back(joint_axis_length)
+    yflip_copy(offset=joint_axis_length) {
+      right(border_h / 2 + 2)
+        // cannot get it to align with edge otherwise
+        ycyl(r=border_h / 2 + 2, l=hinge_thickness, anchor=BOTTOM + BACK)
+          position(FRONT) tag("holes") fwd(EPS) ycyl(d=hinge_inset_diameter, l=hinge_inset, anchor=FRONT);
+      cuboid([border_h / 2 + 2 + EPS, hinge_thickness, base_h], anchor=LEFT + BOTTOM + BACK);
+    }
+}
+
+module left_half_creaturedex() {
+  left((w + hinge_thickness) / 2)
+    diff("holes", "forcekeep")
+      // Outer walls
+      color_this("green")
+        rect_tube(h=base_h, size=[w, l], wall=wall, rounding=[0, 5, 5, 0]) {
+
+          // Gap for extension of top bump
+          position(RIGHT + BACK + BOTTOM)
+            fwd(wall)
+              move([EPS / 2, 0, -EPS / 2])
+                tag("holes")
+                  cuboid([wall + EPS, top_bump_width_small - wall + EPS, EPS + bump_height + base_h], anchor=RIGHT + BOTTOM + BACK);
+
+          // Recessed Faceplate
+          attach(TOP)
+            recolor("blue")
+              down(recess_h) {
+                cuboid([w - EPS, l - EPS, faceplate_thickness], rounding=5, edges="Z", anchor=TOP) {
+                  position(BACK)
+                    tag("holes") top_bump(height=bump_height + faceplate_thickness + recess_h, wall=wall, inverted=true, anchor=BACK);
+                }
+              }
+
+          // Top Bump
+          tag("forcekeep")
+            recolor("Gold")
+              position(TOP + BACK) {
+                down(recess_h + faceplate_thickness)
+                  top_bump(height=bump_height + faceplate_thickness + recess_h, extra_width=hinge_thickness, wall=wall, anchor=BOTTOM + BACK) {
+                    position(TOP + BACK)
+                      fwd(20) {
+                        position(LEFT)
+                          right(w / 5)
+                            top_bump_big_sphere(diameter=23, ring_extra_diameter=4, ring_height=2);
+                        position(RIGHT)
+                          left(w / 5)
+                            top_bump_small_spheres(diameter=7, spacing=15);
+                      }
+                    position(FRONT + BOTTOM)
+                      fwd(wall)
+                        top_bump_skirt(recess_h + faceplate_thickness);
+                    position(RIGHT + BACK + TOP)
+                      down(EPS)
+                        back(EPS)
+                          recolor("red")
+                            top_bump_side_extension(width=hinge_thickness + wall, height=bump_height + base_h);
+                  }
+              }
+
+          // TODO: do this properly!
+          // 4. Cutouts/Details in the Recessed Area
+          *up(base_h / 2 - max_h / 2) {
+            // Main Portrait Display Cutout
+            translate([0, 10, 0])
+              tag("holes") cuboid([w - 40, l - 90, base_h + 2], rounding=2, edges="Z");
+
+            // Small Landscape Display Cutout (Bottom Left)
+            translate([-w / 2 + 35, -l / 2 + 35, 0])
+              tag("holes") cuboid([28, 12, base_h + 2], rounding=1, edges="Z");
+
+            // D-Pad Cutout (Bottom Right)
+            translate([w / 2 - 35, -l / 2 + 35, 0])
+              tag("holes") union() {
+                  cuboid([22, 8, base_h + 2], rounding=1, edges="Z");
+                  cuboid([8, 22, base_h + 2], rounding=1, edges="Z");
+                }
+          }
+
+          // 5. Right Side Hinges
+          recolor("Red")
+            position(BOTTOM + RIGHT + FRONT) {
+              hinges();
+            }
+        }
+}
+
+left_half_creaturedex();
+
+left(300) left_half_orig();

model/right-half.scad

@@ -106,10 +106,10 @@ module right_half_hinge_only() {
 }
 // !right_half_hinge_only();
 
-module right_half() {
+module right_half_creaturedex() {
     right_half_door_only();
     right_half_hinge_only();
 }
 
-// right_half();
+// right_half_creaturedex();
 // #right_half_components();