diff --git a/src/chips/common/wokwi-api.h b/src/chips/common/wokwi-api.h
new file mode 100644
index 0000000..bd7f5c6
--- /dev/null
+++ b/src/chips/common/wokwi-api.h
@@ -0,0 +1,30 @@
+#ifndef WOKWI_API_H
+#define WOKWI_API_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+typedef int32_t pin_t;
+
+#define NO_PIN ((pin_t)-1)
+
+enum pin_mode {
+  INPUT = 0,
+  OUTPUT = 1,
+  INPUT_PULLUP = 2,
+  INPUT_PULLDOWN = 3,
+  ANALOG = 4,
+};
+
+typedef struct {
+  void *user_data;
+  uint32_t edge;
+  void (*pin_change)(void *user_data, pin_t pin, uint32_t value);
+} pin_watch_config_t;
+
+extern __attribute__((import_name("pinInit"))) pin_t pin_init(const char *name, uint32_t mode);
+extern __attribute__((import_name("pinWatch"))) bool pin_watch(pin_t pin, const pin_watch_config_t *config);
+extern __attribute__((import_name("pinWatchStop"))) void pin_watch_stop(pin_t pin);
+extern __attribute__((export_name("chipInit"))) void chip_init(void);
+
+#endif
\ No newline at end of file
diff --git a/src/chips/main-display/Makefile b/src/chips/main-display/Makefile
new file mode 100644
index 0000000..adfe690
--- /dev/null
+++ b/src/chips/main-display/Makefile
@@ -0,0 +1,19 @@
+SOURCES = src/main.c
+TARGET  = dist/chip.wasm
+
+.PHONY: all clean
+
+all: $(TARGET) dist/chip.json
+
+clean:
+	rm -rf dist
+
+dist:
+	mkdir -p dist
+
+$(TARGET): dist $(SOURCES) wokwi-api.h
+	podman run --rm -u root -v "$(CURDIR)":/src:Z -w /src docker.io/wokwi/builder-clang-wasm:latest \
+		clang --target=wasm32-unknown-wasi --sysroot /opt/wasi-libc -nostartfiles -Wl,--import-memory -Wl,--export-table -Wl,--no-entry -Werror -o $(TARGET) $(SOURCES)
+
+dist/chip.json: dist chip.json
+	cp chip.json dist
diff --git a/src/chips/main-display/chip.json b/src/chips/main-display/chip.json
new file mode 100644
index 0000000..2fdb1d8
--- /dev/null
+++ b/src/chips/main-display/chip.json
@@ -0,0 +1,6 @@
+{
+  "name": "Main Display",
+  "author": "GitHub Copilot",
+  "display": { "width": 240, "height": 320 },
+  "pins": ["VCC", "GND", "SCK", "MOSI", "CS", "DC", "RESET", "LED"]
+}
\ No newline at end of file
diff --git a/src/chips/main-display/dist/chip.json b/src/chips/main-display/dist/chip.json
new file mode 100644
index 0000000..2fdb1d8
--- /dev/null
+++ b/src/chips/main-display/dist/chip.json
@@ -0,0 +1,6 @@
+{
+  "name": "Main Display",
+  "author": "GitHub Copilot",
+  "display": { "width": 240, "height": 320 },
+  "pins": ["VCC", "GND", "SCK", "MOSI", "CS", "DC", "RESET", "LED"]
+}
\ No newline at end of file
diff --git a/src/chips/main-display/dist/chip.wasm b/src/chips/main-display/dist/chip.wasm
new file mode 100755
index 0000000..1aaa994
Binary files /dev/null and b/src/chips/main-display/dist/chip.wasm differ
diff --git a/src/chips/main-display/src/main.c b/src/chips/main-display/src/main.c
new file mode 100644
index 0000000..93b4640
--- /dev/null
+++ b/src/chips/main-display/src/main.c
@@ -0,0 +1,243 @@
+#include "../wokwi-api.h"
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+
+typedef struct {
+  buffer_t framebuffer;
+  uint32_t width;
+  uint32_t height;
+  spi_dev_t spi;
+  pin_t cs_pin;
+  pin_t dc_pin;
+  pin_t rst_pin;
+  pin_t led_pin;
+  uint8_t spi_buffer[128];
+  uint8_t current_cmd;
+  uint8_t expected_params;
+  uint8_t param_index;
+  uint8_t params[4];
+  bool memory_write;
+  bool color_high_pending;
+  uint8_t color_high;
+  uint16_t col_start;
+  uint16_t col_end;
+  uint16_t row_start;
+  uint16_t row_end;
+  uint16_t cursor_col;
+  uint16_t cursor_row;
+} main_display_state_t;
+
+static main_display_state_t *chip;
+
+static uint16_t clamp_u16(uint16_t value, uint16_t limit) {
+  return value > limit ? limit : value;
+}
+
+static void draw_pixel(uint16_t x, uint16_t y, uint16_t color565) {
+  if (x >= chip->width || y >= chip->height) {
+    return;
+  }
+
+  uint8_t pixel[4];
+  pixel[0] = (uint8_t)(((color565 >> 11) & 0x1F) << 3);
+  pixel[1] = (uint8_t)(((color565 >> 5) & 0x3F) << 2);
+  pixel[2] = (uint8_t)((color565 & 0x1F) << 3);
+  pixel[3] = 255;
+  buffer_write(chip->framebuffer, ((y * chip->width) + x) * 4, pixel, 4);
+}
+
+static void fill_screen(uint16_t color565) {
+  for (uint32_t y = 0; y < chip->height; ++y) {
+    for (uint32_t x = 0; x < chip->width; ++x) {
+      draw_pixel((uint16_t)x, (uint16_t)y, color565);
+    }
+  }
+}
+
+static void reset_state(void) {
+  chip->current_cmd = 0;
+  chip->expected_params = 0;
+  chip->param_index = 0;
+  chip->memory_write = false;
+  chip->color_high_pending = false;
+  chip->col_start = 0;
+  chip->col_end = (uint16_t)(chip->width - 1);
+  chip->row_start = 0;
+  chip->row_end = (uint16_t)(chip->height - 1);
+  chip->cursor_col = 0;
+  chip->cursor_row = 0;
+  fill_screen(0x0000);
+}
+
+static void advance_pixel_cursor(void) {
+  if (chip->cursor_col < chip->col_end) {
+    ++chip->cursor_col;
+    return;
+  }
+
+  chip->cursor_col = chip->col_start;
+  if (chip->cursor_row < chip->row_end) {
+    ++chip->cursor_row;
+    return;
+  }
+
+  chip->cursor_row = chip->row_start;
+}
+
+static void apply_params(void) {
+  switch (chip->current_cmd) {
+    case 0x2A:
+      chip->col_start = clamp_u16((uint16_t)((chip->params[0] << 8) | chip->params[1]), (uint16_t)(chip->width - 1));
+      chip->col_end = clamp_u16((uint16_t)((chip->params[2] << 8) | chip->params[3]), (uint16_t)(chip->width - 1));
+      if (chip->col_end < chip->col_start) {
+        chip->col_end = chip->col_start;
+      }
+      chip->cursor_col = chip->col_start;
+      break;
+    case 0x2B:
+      chip->row_start = clamp_u16((uint16_t)((chip->params[0] << 8) | chip->params[1]), (uint16_t)(chip->height - 1));
+      chip->row_end = clamp_u16((uint16_t)((chip->params[2] << 8) | chip->params[3]), (uint16_t)(chip->height - 1));
+      if (chip->row_end < chip->row_start) {
+        chip->row_end = chip->row_start;
+      }
+      chip->cursor_row = chip->row_start;
+      break;
+    default:
+      break;
+  }
+
+  chip->current_cmd = 0;
+  chip->expected_params = 0;
+  chip->param_index = 0;
+}
+
+static void process_command(uint8_t command) {
+  chip->current_cmd = command;
+  chip->param_index = 0;
+  chip->expected_params = 0;
+  chip->memory_write = false;
+
+  switch (command) {
+    case 0x01:
+      reset_state();
+      break;
+    case 0x2A:
+    case 0x2B:
+      chip->expected_params = 4;
+      break;
+    case 0x2C:
+      chip->memory_write = true;
+      chip->cursor_col = chip->col_start;
+      chip->cursor_row = chip->row_start;
+      chip->color_high_pending = false;
+      break;
+    case 0x36:
+    case 0x3A:
+      chip->expected_params = 1;
+      break;
+    default:
+      break;
+  }
+}
+
+static void handle_data_byte(uint8_t data) {
+  if (chip->current_cmd != 0 && chip->expected_params > 0) {
+    chip->params[chip->param_index++] = data;
+    if (chip->param_index >= chip->expected_params) {
+      apply_params();
+    }
+    return;
+  }
+
+  if (!chip->memory_write) {
+    return;
+  }
+
+  if (!chip->color_high_pending) {
+    chip->color_high = data;
+    chip->color_high_pending = true;
+    return;
+  }
+
+  uint16_t color565 = (uint16_t)((chip->color_high << 8) | data);
+  draw_pixel(chip->cursor_col, chip->cursor_row, color565);
+  advance_pixel_cursor();
+  chip->color_high_pending = false;
+}
+
+static void chip_spi_done(void *user_data, uint8_t *buffer, uint32_t count) {
+  (void)user_data;
+
+  for (uint32_t i = 0; i < count; ++i) {
+    if (pin_read(chip->dc_pin) == 0) {
+      process_command(buffer[i]);
+    } else {
+      handle_data_byte(buffer[i]);
+    }
+  }
+
+  if (pin_read(chip->cs_pin) == 0) {
+    spi_start(chip->spi, chip->spi_buffer, sizeof(chip->spi_buffer));
+  }
+}
+
+static void chip_cs_changed(void *user_data, pin_t pin, uint32_t value) {
+  (void)user_data;
+  (void)pin;
+
+  if (value == 0) {
+    spi_start(chip->spi, chip->spi_buffer, sizeof(chip->spi_buffer));
+  } else {
+    spi_stop(chip->spi);
+    chip->memory_write = false;
+    chip->color_high_pending = false;
+  }
+}
+
+static void chip_reset_changed(void *user_data, pin_t pin, uint32_t value) {
+  (void)user_data;
+  (void)pin;
+
+  if (value == 0) {
+    reset_state();
+  }
+}
+
+void chip_init(void) {
+  chip = (main_display_state_t *)malloc(sizeof(main_display_state_t));
+  chip->framebuffer = framebuffer_init(&chip->width, &chip->height);
+  chip->cs_pin = pin_init("CS", INPUT);
+  chip->dc_pin = pin_init("DC", INPUT);
+  chip->rst_pin = pin_init("RESET", INPUT_PULLUP);
+  chip->led_pin = pin_init("LED", INPUT);
+
+  const spi_config_t spi_config = {
+    .user_data = chip,
+    .sck = pin_init("SCK", INPUT),
+    .mosi = pin_init("MOSI", INPUT),
+    .miso = NO_PIN,
+    .mode = 0,
+    .done = chip_spi_done,
+  };
+
+  chip->spi = spi_init(&spi_config);
+
+  const pin_watch_config_t cs_watch = {
+    .user_data = chip,
+    .edge = BOTH,
+    .pin_change = chip_cs_changed,
+  };
+  pin_watch(chip->cs_pin, &cs_watch);
+
+  const pin_watch_config_t reset_watch = {
+    .user_data = chip,
+    .edge = BOTH,
+    .pin_change = chip_reset_changed,
+  };
+  pin_watch(chip->rst_pin, &reset_watch);
+
+  pin_mode(chip->led_pin, OUTPUT_HIGH);
+  reset_state();
+}
diff --git a/src/chips/main-display/wokwi-api.h b/src/chips/main-display/wokwi-api.h
new file mode 100644
index 0000000..1b4a7c1
--- /dev/null
+++ b/src/chips/main-display/wokwi-api.h
@@ -0,0 +1,74 @@
+#ifndef WOKWI_API_H
+#define WOKWI_API_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+typedef int32_t pin_t;
+#define NO_PIN ((pin_t)-1)
+
+enum pin_mode {
+  INPUT = 0,
+  OUTPUT = 1,
+  INPUT_PULLUP = 2,
+  INPUT_PULLDOWN = 3,
+  ANALOG = 4,
+  OUTPUT_LOW = 16,
+  OUTPUT_HIGH = 17,
+};
+
+enum edge {
+  RISING = 1,
+  FALLING = 2,
+  BOTH = 3,
+};
+
+typedef struct {
+  void *user_data;
+  uint32_t edge;
+  void (*pin_change)(void *user_data, pin_t pin, uint32_t value);
+} pin_watch_config_t;
+
+typedef struct {
+  void *user_data;
+  pin_t sck;
+  pin_t mosi;
+  pin_t miso;
+  uint32_t mode;
+  void (*done)(void *user_data, uint8_t *buffer, uint32_t count);
+  uint32_t reserved[8];
+} spi_config_t;
+
+typedef uint32_t spi_dev_t;
+
+typedef struct {
+  void *user_data;
+  uint32_t address;
+  pin_t scl;
+  pin_t sda;
+  bool (*connect)(void *user_data, uint32_t address, bool read);
+  uint8_t (*read)(void *user_data);
+  bool (*write)(void *user_data, uint8_t data);
+  void (*disconnect)(void *user_data);
+  uint32_t reserved[8];
+} i2c_config_t;
+
+typedef uint32_t i2c_dev_t;
+
+typedef uint32_t buffer_t;
+
+extern __attribute__((export_name("chipInit"))) void chip_init(void);
+extern __attribute__((import_name("pinInit"))) pin_t pin_init(const char *name, uint32_t mode);
+extern __attribute__((import_name("pinWatch"))) bool pin_watch(pin_t pin, const pin_watch_config_t *config);
+extern __attribute__((import_name("pinWatchStop"))) void pin_watch_stop(pin_t pin);
+extern __attribute__((import_name("pinMode"))) void pin_mode(pin_t pin, uint32_t value);
+extern __attribute__((import_name("pinRead"))) uint32_t pin_read(pin_t pin);
+extern __attribute__((import_name("pinWrite"))) void pin_write(pin_t pin, uint32_t value);
+extern __attribute__((import_name("spiInit"))) spi_dev_t spi_init(const spi_config_t *config);
+extern __attribute__((import_name("spiStart"))) void spi_start(const spi_dev_t spi, uint8_t *buffer, uint32_t count);
+extern __attribute__((import_name("spiStop"))) void spi_stop(const spi_dev_t spi);
+extern __attribute__((import_name("i2cInit"))) i2c_dev_t i2c_init(const i2c_config_t *config);
+extern __attribute__((import_name("framebufferInit"))) buffer_t framebuffer_init(uint32_t *pixel_width, uint32_t *pixel_height);
+extern __attribute__((import_name("bufferWrite"))) void buffer_write(buffer_t buffer, uint32_t offset, void *data, uint32_t data_len);
+
+#endif
\ No newline at end of file
diff --git a/src/chips/nfc-reader/Makefile b/src/chips/nfc-reader/Makefile
new file mode 100644
index 0000000..adfe690
--- /dev/null
+++ b/src/chips/nfc-reader/Makefile
@@ -0,0 +1,19 @@
+SOURCES = src/main.c
+TARGET  = dist/chip.wasm
+
+.PHONY: all clean
+
+all: $(TARGET) dist/chip.json
+
+clean:
+	rm -rf dist
+
+dist:
+	mkdir -p dist
+
+$(TARGET): dist $(SOURCES) wokwi-api.h
+	podman run --rm -u root -v "$(CURDIR)":/src:Z -w /src docker.io/wokwi/builder-clang-wasm:latest \
+		clang --target=wasm32-unknown-wasi --sysroot /opt/wasi-libc -nostartfiles -Wl,--import-memory -Wl,--export-table -Wl,--no-entry -Werror -o $(TARGET) $(SOURCES)
+
+dist/chip.json: dist chip.json
+	cp chip.json dist
diff --git a/src/chips/nfc-reader/chip.json b/src/chips/nfc-reader/chip.json
new file mode 100644
index 0000000..e38cca7
--- /dev/null
+++ b/src/chips/nfc-reader/chip.json
@@ -0,0 +1,5 @@
+{
+  "name": "PN532 NFC Reader",
+  "author": "GitHub Copilot",
+  "pins": ["VCC", "GND", "SCL", "SDA", "IRQ", "RSTPDN", "SS", "MOSI", "MISO", "SCK"]
+}
\ No newline at end of file
diff --git a/src/chips/nfc-reader/dist/chip.json b/src/chips/nfc-reader/dist/chip.json
new file mode 100644
index 0000000..e38cca7
--- /dev/null
+++ b/src/chips/nfc-reader/dist/chip.json
@@ -0,0 +1,5 @@
+{
+  "name": "PN532 NFC Reader",
+  "author": "GitHub Copilot",
+  "pins": ["VCC", "GND", "SCL", "SDA", "IRQ", "RSTPDN", "SS", "MOSI", "MISO", "SCK"]
+}
\ No newline at end of file
diff --git a/src/chips/nfc-reader/dist/chip.wasm b/src/chips/nfc-reader/dist/chip.wasm
new file mode 100755
index 0000000..85a67f6
Binary files /dev/null and b/src/chips/nfc-reader/dist/chip.wasm differ
diff --git a/src/chips/nfc-reader/src/main.c b/src/chips/nfc-reader/src/main.c
new file mode 100644
index 0000000..e8e3419
--- /dev/null
+++ b/src/chips/nfc-reader/src/main.c
@@ -0,0 +1,127 @@
+#include "../wokwi-api.h"
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+
+typedef struct {
+  i2c_dev_t i2c;
+  spi_dev_t spi;
+  pin_t irq_pin;
+  pin_t rst_pin;
+  pin_t ss_pin;
+  uint8_t spi_buffer[16];
+  uint8_t ack_frame[6];
+  bool ready;
+} nfc_reader_state_t;
+
+static nfc_reader_state_t *chip;
+
+static void update_irq(void) {
+  pin_write(chip->irq_pin, chip->ready ? 0 : 1);
+}
+
+static void load_ack_frame(void) {
+  chip->ack_frame[0] = 0x00;
+  chip->ack_frame[1] = 0x00;
+  chip->ack_frame[2] = 0xFF;
+  chip->ack_frame[3] = 0x00;
+  chip->ack_frame[4] = 0xFF;
+  chip->ack_frame[5] = 0x00;
+}
+
+static void on_spi_done(void *user_data, uint8_t *buffer, uint32_t count) {
+  (void)user_data;
+  (void)buffer;
+  (void)count;
+  load_ack_frame();
+  if (pin_read(chip->ss_pin) == 0) {
+    spi_start(chip->spi, chip->spi_buffer, sizeof(chip->spi_buffer));
+  }
+}
+
+static void on_ss_changed(void *user_data, pin_t pin, uint32_t value) {
+  (void)user_data;
+  (void)pin;
+  if (value == 0) {
+    spi_start(chip->spi, chip->spi_buffer, sizeof(chip->spi_buffer));
+  } else {
+    spi_stop(chip->spi);
+  }
+}
+
+static void on_rst_changed(void *user_data, pin_t pin, uint32_t value) {
+  (void)user_data;
+  (void)pin;
+  chip->ready = value != 0;
+  update_irq();
+}
+
+static bool on_i2c_connect(void *user_data, uint32_t address, bool read) {
+  (void)user_data;
+  (void)address;
+  (void)read;
+  return true;
+}
+
+static uint8_t on_i2c_read(void *user_data) {
+  (void)user_data;
+  return 0;
+}
+
+static bool on_i2c_write(void *user_data, uint8_t data) {
+  (void)user_data;
+  (void)data;
+  return true;
+}
+
+static void on_i2c_disconnect(void *user_data) {
+  (void)user_data;
+}
+
+void chip_init(void) {
+  chip = (nfc_reader_state_t *)malloc(sizeof(nfc_reader_state_t));
+  chip->irq_pin = pin_init("IRQ", INPUT);
+  chip->rst_pin = pin_init("RSTPDN", INPUT_PULLUP);
+  chip->ss_pin = pin_init("SS", INPUT_PULLUP);
+
+  const spi_config_t spi_config = {
+    .user_data = chip,
+    .sck = pin_init("SCK", INPUT),
+    .mosi = pin_init("MOSI", INPUT),
+    .miso = pin_init("MISO", INPUT),
+    .mode = 0,
+    .done = on_spi_done,
+  };
+  chip->spi = spi_init(&spi_config);
+
+  const pin_watch_config_t ss_watch = {
+    .user_data = chip,
+    .edge = BOTH,
+    .pin_change = on_ss_changed,
+  };
+  pin_watch(chip->ss_pin, &ss_watch);
+
+  const pin_watch_config_t rst_watch = {
+    .user_data = chip,
+    .edge = BOTH,
+    .pin_change = on_rst_changed,
+  };
+  pin_watch(chip->rst_pin, &rst_watch);
+
+  const i2c_config_t i2c_config = {
+    .user_data = chip,
+    .address = 0x24,
+    .scl = pin_init("SCL", INPUT_PULLUP),
+    .sda = pin_init("SDA", INPUT_PULLUP),
+    .connect = on_i2c_connect,
+    .read = on_i2c_read,
+    .write = on_i2c_write,
+    .disconnect = on_i2c_disconnect,
+  };
+  chip->i2c = i2c_init(&i2c_config);
+
+  chip->ready = true;
+  load_ack_frame();
+  update_irq();
+}
\ No newline at end of file
diff --git a/src/chips/nfc-reader/wokwi-api.h b/src/chips/nfc-reader/wokwi-api.h
new file mode 100644
index 0000000..1b4a7c1
--- /dev/null
+++ b/src/chips/nfc-reader/wokwi-api.h
@@ -0,0 +1,74 @@
+#ifndef WOKWI_API_H
+#define WOKWI_API_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+typedef int32_t pin_t;
+#define NO_PIN ((pin_t)-1)
+
+enum pin_mode {
+  INPUT = 0,
+  OUTPUT = 1,
+  INPUT_PULLUP = 2,
+  INPUT_PULLDOWN = 3,
+  ANALOG = 4,
+  OUTPUT_LOW = 16,
+  OUTPUT_HIGH = 17,
+};
+
+enum edge {
+  RISING = 1,
+  FALLING = 2,
+  BOTH = 3,
+};
+
+typedef struct {
+  void *user_data;
+  uint32_t edge;
+  void (*pin_change)(void *user_data, pin_t pin, uint32_t value);
+} pin_watch_config_t;
+
+typedef struct {
+  void *user_data;
+  pin_t sck;
+  pin_t mosi;
+  pin_t miso;
+  uint32_t mode;
+  void (*done)(void *user_data, uint8_t *buffer, uint32_t count);
+  uint32_t reserved[8];
+} spi_config_t;
+
+typedef uint32_t spi_dev_t;
+
+typedef struct {
+  void *user_data;
+  uint32_t address;
+  pin_t scl;
+  pin_t sda;
+  bool (*connect)(void *user_data, uint32_t address, bool read);
+  uint8_t (*read)(void *user_data);
+  bool (*write)(void *user_data, uint8_t data);
+  void (*disconnect)(void *user_data);
+  uint32_t reserved[8];
+} i2c_config_t;
+
+typedef uint32_t i2c_dev_t;
+
+typedef uint32_t buffer_t;
+
+extern __attribute__((export_name("chipInit"))) void chip_init(void);
+extern __attribute__((import_name("pinInit"))) pin_t pin_init(const char *name, uint32_t mode);
+extern __attribute__((import_name("pinWatch"))) bool pin_watch(pin_t pin, const pin_watch_config_t *config);
+extern __attribute__((import_name("pinWatchStop"))) void pin_watch_stop(pin_t pin);
+extern __attribute__((import_name("pinMode"))) void pin_mode(pin_t pin, uint32_t value);
+extern __attribute__((import_name("pinRead"))) uint32_t pin_read(pin_t pin);
+extern __attribute__((import_name("pinWrite"))) void pin_write(pin_t pin, uint32_t value);
+extern __attribute__((import_name("spiInit"))) spi_dev_t spi_init(const spi_config_t *config);
+extern __attribute__((import_name("spiStart"))) void spi_start(const spi_dev_t spi, uint8_t *buffer, uint32_t count);
+extern __attribute__((import_name("spiStop"))) void spi_stop(const spi_dev_t spi);
+extern __attribute__((import_name("i2cInit"))) i2c_dev_t i2c_init(const i2c_config_t *config);
+extern __attribute__((import_name("framebufferInit"))) buffer_t framebuffer_init(uint32_t *pixel_width, uint32_t *pixel_height);
+extern __attribute__((import_name("bufferWrite"))) void buffer_write(buffer_t buffer, uint32_t offset, void *data, uint32_t data_len);
+
+#endif
\ No newline at end of file
diff --git a/src/chips/secondary-display/Makefile b/src/chips/secondary-display/Makefile
new file mode 100644
index 0000000..adfe690
--- /dev/null
+++ b/src/chips/secondary-display/Makefile
@@ -0,0 +1,19 @@
+SOURCES = src/main.c
+TARGET  = dist/chip.wasm
+
+.PHONY: all clean
+
+all: $(TARGET) dist/chip.json
+
+clean:
+	rm -rf dist
+
+dist:
+	mkdir -p dist
+
+$(TARGET): dist $(SOURCES) wokwi-api.h
+	podman run --rm -u root -v "$(CURDIR)":/src:Z -w /src docker.io/wokwi/builder-clang-wasm:latest \
+		clang --target=wasm32-unknown-wasi --sysroot /opt/wasi-libc -nostartfiles -Wl,--import-memory -Wl,--export-table -Wl,--no-entry -Werror -o $(TARGET) $(SOURCES)
+
+dist/chip.json: dist chip.json
+	cp chip.json dist
diff --git a/src/chips/secondary-display/chip.json b/src/chips/secondary-display/chip.json
new file mode 100644
index 0000000..0b1fd16
--- /dev/null
+++ b/src/chips/secondary-display/chip.json
@@ -0,0 +1,6 @@
+{
+  "name": "Secondary Display",
+  "author": "GitHub Copilot",
+  "display": { "width": 84, "height": 48 },
+  "pins": ["VCC", "LIGHT", "GND", "CLK", "DIN", "CE", "DC", "RST"]
+}
\ No newline at end of file
diff --git a/src/chips/secondary-display/dist/chip.json b/src/chips/secondary-display/dist/chip.json
new file mode 100644
index 0000000..0b1fd16
--- /dev/null
+++ b/src/chips/secondary-display/dist/chip.json
@@ -0,0 +1,6 @@
+{
+  "name": "Secondary Display",
+  "author": "GitHub Copilot",
+  "display": { "width": 84, "height": 48 },
+  "pins": ["VCC", "LIGHT", "GND", "CLK", "DIN", "CE", "DC", "RST"]
+}
\ No newline at end of file
diff --git a/src/chips/secondary-display/dist/chip.wasm b/src/chips/secondary-display/dist/chip.wasm
new file mode 100755
index 0000000..4e49010
Binary files /dev/null and b/src/chips/secondary-display/dist/chip.wasm differ
diff --git a/src/chips/secondary-display/src/main.c b/src/chips/secondary-display/src/main.c
new file mode 100644
index 0000000..8142a54
--- /dev/null
+++ b/src/chips/secondary-display/src/main.c
@@ -0,0 +1,171 @@
+#include "../wokwi-api.h"
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+
+typedef struct {
+  buffer_t framebuffer;
+  uint32_t width;
+  uint32_t height;
+  spi_dev_t spi;
+  pin_t ce_pin;
+  pin_t dc_pin;
+  pin_t rst_pin;
+  uint8_t spi_buffer[64];
+  uint8_t x;
+  uint8_t y;
+  bool extended_commands;
+} secondary_display_state_t;
+
+static secondary_display_state_t *chip;
+
+static void set_pixel(uint8_t x, uint8_t y, bool on) {
+  if (x >= chip->width || y >= chip->height) {
+    return;
+  }
+
+  uint8_t pixel[4] = {0, 0, 0, 255};
+  if (on) {
+    pixel[0] = 0x20;
+    pixel[1] = 0x90;
+    pixel[2] = 0x20;
+  }
+
+  buffer_write(chip->framebuffer, ((uint32_t)y * chip->width + x) * 4, pixel, 4);
+}
+
+static void clear_display(void) {
+  for (uint32_t y = 0; y < chip->height; ++y) {
+    for (uint32_t x = 0; x < chip->width; ++x) {
+      set_pixel((uint8_t)x, (uint8_t)y, false);
+    }
+  }
+  chip->x = 0;
+  chip->y = 0;
+}
+
+static void write_data(uint8_t data) {
+  for (uint8_t bit = 0; bit < 8; ++bit) {
+    set_pixel(chip->x, (uint8_t)(chip->y * 8 + bit), (data >> bit) & 1);
+  }
+
+  ++chip->x;
+  if (chip->x >= chip->width) {
+    chip->x = 0;
+    ++chip->y;
+    if (chip->y >= (chip->height / 8)) {
+      chip->y = 0;
+    }
+  }
+}
+
+static void write_command(uint8_t command) {
+  if (command == 0x20) {
+    chip->extended_commands = false;
+    return;
+  }
+
+  if (command == 0x21) {
+    chip->extended_commands = true;
+    return;
+  }
+
+  if (command == 0x0C) {
+    return;
+  }
+
+  if (command == 0x08) {
+    clear_display();
+    return;
+  }
+
+  if (command == 0x80 || (command & 0x80) == 0x80) {
+    chip->x = (uint8_t)(command & 0x7F);
+    if (chip->x >= chip->width) {
+      chip->x = 0;
+    }
+    return;
+  }
+
+  if (command == 0x40 || (command & 0x40) == 0x40) {
+    chip->y = (uint8_t)(command & 0x07);
+    if (chip->y >= (chip->height / 8)) {
+      chip->y = 0;
+    }
+    return;
+  }
+
+  if (command == 0x01) {
+    clear_display();
+  }
+}
+
+static void chip_spi_done(void *user_data, uint8_t *buffer, uint32_t count) {
+  (void)user_data;
+  for (uint32_t i = 0; i < count; ++i) {
+    if (pin_read(chip->dc_pin) == 0) {
+      write_command(buffer[i]);
+    } else {
+      write_data(buffer[i]);
+    }
+  }
+
+  if (pin_read(chip->ce_pin) == 0) {
+    spi_start(chip->spi, chip->spi_buffer, sizeof(chip->spi_buffer));
+  }
+}
+
+static void chip_ce_changed(void *user_data, pin_t pin, uint32_t value) {
+  (void)user_data;
+  (void)pin;
+
+  if (value == 0) {
+    spi_start(chip->spi, chip->spi_buffer, sizeof(chip->spi_buffer));
+  } else {
+    spi_stop(chip->spi);
+  }
+}
+
+static void chip_rst_changed(void *user_data, pin_t pin, uint32_t value) {
+  (void)user_data;
+  (void)pin;
+
+  if (value == 0) {
+    clear_display();
+  }
+}
+
+void chip_init(void) {
+  chip = (secondary_display_state_t *)malloc(sizeof(secondary_display_state_t));
+  chip->framebuffer = framebuffer_init(&chip->width, &chip->height);
+  chip->ce_pin = pin_init("CE", INPUT);
+  chip->dc_pin = pin_init("DC", INPUT);
+  chip->rst_pin = pin_init("RST", INPUT_PULLUP);
+
+  const spi_config_t spi_config = {
+    .user_data = chip,
+    .sck = pin_init("CLK", INPUT),
+    .mosi = pin_init("DIN", INPUT),
+    .miso = NO_PIN,
+    .mode = 0,
+    .done = chip_spi_done,
+  };
+  chip->spi = spi_init(&spi_config);
+
+  const pin_watch_config_t ce_watch = {
+    .user_data = chip,
+    .edge = BOTH,
+    .pin_change = chip_ce_changed,
+  };
+  pin_watch(chip->ce_pin, &ce_watch);
+
+  const pin_watch_config_t rst_watch = {
+    .user_data = chip,
+    .edge = BOTH,
+    .pin_change = chip_rst_changed,
+  };
+  pin_watch(chip->rst_pin, &rst_watch);
+
+  clear_display();
+}
\ No newline at end of file
diff --git a/src/chips/secondary-display/wokwi-api.h b/src/chips/secondary-display/wokwi-api.h
new file mode 100644
index 0000000..1b4a7c1
--- /dev/null
+++ b/src/chips/secondary-display/wokwi-api.h
@@ -0,0 +1,74 @@
+#ifndef WOKWI_API_H
+#define WOKWI_API_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+typedef int32_t pin_t;
+#define NO_PIN ((pin_t)-1)
+
+enum pin_mode {
+  INPUT = 0,
+  OUTPUT = 1,
+  INPUT_PULLUP = 2,
+  INPUT_PULLDOWN = 3,
+  ANALOG = 4,
+  OUTPUT_LOW = 16,
+  OUTPUT_HIGH = 17,
+};
+
+enum edge {
+  RISING = 1,
+  FALLING = 2,
+  BOTH = 3,
+};
+
+typedef struct {
+  void *user_data;
+  uint32_t edge;
+  void (*pin_change)(void *user_data, pin_t pin, uint32_t value);
+} pin_watch_config_t;
+
+typedef struct {
+  void *user_data;
+  pin_t sck;
+  pin_t mosi;
+  pin_t miso;
+  uint32_t mode;
+  void (*done)(void *user_data, uint8_t *buffer, uint32_t count);
+  uint32_t reserved[8];
+} spi_config_t;
+
+typedef uint32_t spi_dev_t;
+
+typedef struct {
+  void *user_data;
+  uint32_t address;
+  pin_t scl;
+  pin_t sda;
+  bool (*connect)(void *user_data, uint32_t address, bool read);
+  uint8_t (*read)(void *user_data);
+  bool (*write)(void *user_data, uint8_t data);
+  void (*disconnect)(void *user_data);
+  uint32_t reserved[8];
+} i2c_config_t;
+
+typedef uint32_t i2c_dev_t;
+
+typedef uint32_t buffer_t;
+
+extern __attribute__((export_name("chipInit"))) void chip_init(void);
+extern __attribute__((import_name("pinInit"))) pin_t pin_init(const char *name, uint32_t mode);
+extern __attribute__((import_name("pinWatch"))) bool pin_watch(pin_t pin, const pin_watch_config_t *config);
+extern __attribute__((import_name("pinWatchStop"))) void pin_watch_stop(pin_t pin);
+extern __attribute__((import_name("pinMode"))) void pin_mode(pin_t pin, uint32_t value);
+extern __attribute__((import_name("pinRead"))) uint32_t pin_read(pin_t pin);
+extern __attribute__((import_name("pinWrite"))) void pin_write(pin_t pin, uint32_t value);
+extern __attribute__((import_name("spiInit"))) spi_dev_t spi_init(const spi_config_t *config);
+extern __attribute__((import_name("spiStart"))) void spi_start(const spi_dev_t spi, uint8_t *buffer, uint32_t count);
+extern __attribute__((import_name("spiStop"))) void spi_stop(const spi_dev_t spi);
+extern __attribute__((import_name("i2cInit"))) i2c_dev_t i2c_init(const i2c_config_t *config);
+extern __attribute__((import_name("framebufferInit"))) buffer_t framebuffer_init(uint32_t *pixel_width, uint32_t *pixel_height);
+extern __attribute__((import_name("bufferWrite"))) void buffer_write(buffer_t buffer, uint32_t offset, void *data, uint32_t data_len);
+
+#endif
\ No newline at end of file
diff --git a/src/diagram.json b/src/diagram.json
new file mode 100644
index 0000000..9f5f0cb
--- /dev/null
+++ b/src/diagram.json
@@ -0,0 +1,103 @@
+{
+  "version": 1,
+  "author": "CreatureDex Builder",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-s3-devkitc-1",
+      "id": "esp",
+      "top": -144.18,
+      "left": -168.23,
+      "attrs": {}
+    },
+    {
+      "type": "wokwi-lcd1602",
+      "id": "lcd1",
+      "top": -310.4,
+      "left": -253.6,
+      "attrs": { "pins": "i2c" }
+    },
+    { 
+      "type": "chip-main-display", 
+      "id": "lcd2", 
+      "top": -162.4, 
+      "left": 105.3, 
+      "attrs": {} 
+    },
+    {
+      "type": "chip-secondary-display",
+      "id": "oled_spi_1",
+      "top": 210,
+      "left": -291.78,
+      "attrs": {}
+    },
+    {
+      "type": "chip-secondary-display",
+      "id": "oled_spi_2",
+      "top": 210,
+      "left": -109.38,
+      "attrs": {}
+    },
+    { 
+      "type": "chip-secondary-display", 
+      "id": "oled_spi_3", 
+      "top": 210, 
+      "left": 73.02, 
+      "attrs": {} 
+    },
+    {
+      "type": "chip-nfc-reader",
+      "id": "nfc1",
+      "top": 390,
+      "left": -24,
+      "attrs": {},
+      "hide": true
+    }
+  ],
+  "connections": [
+    [ "esp:TX", "$serialMonitor:RX", "", [] ],
+    [ "esp:RX", "$serialMonitor:TX", "", [] ],
+
+    [ "esp:3V3", "lcd1:VCC", "", [] ],
+    [ "esp:GND", "lcd1:GND", "", [] ],
+    [ "esp:8", "lcd1:SDA", "", [] ],
+    [ "esp:9", "lcd1:SCL", "", [] ],
+
+    [ "esp:3V3", "lcd2:VCC", "", [] ],
+    [ "esp:3V3", "lcd2:LED", "", [] ],
+    [ "esp:GND", "lcd2:GND", "", [] ],
+    [ "esp:12", "lcd2:SCK", "", [] ],
+    [ "esp:11", "lcd2:MOSI", "", [] ],
+    [ "esp:10", "lcd2:CS", "", [] ],
+    [ "esp:7", "lcd2:D/C", "", [] ],
+    [ "esp:5", "lcd2:RESET", "", [] ],
+
+    [ "esp:3V3", "oled_spi_1:VCC", "", [] ],
+    [ "esp:3V3", "oled_spi_1:LIGHT", "", [] ],
+    [ "esp:GND", "oled_spi_1:GND", "", [] ],
+    [ "esp:12", "oled_spi_1:CLK", "", [] ],
+    [ "esp:11", "oled_spi_1:DIN", "", [] ],
+    [ "esp:14", "oled_spi_1:CE", "", [] ],
+    [ "esp:6", "oled_spi_1:DC", "", [] ],
+    [ "esp:5", "oled_spi_1:RST", "", [] ],
+
+    [ "esp:3V3", "oled_spi_2:VCC", "", [] ],
+    [ "esp:3V3", "oled_spi_2:LIGHT", "", [] ],
+    [ "esp:GND", "oled_spi_2:GND", "", [] ],
+    [ "esp:12", "oled_spi_2:CLK", "", [] ],
+    [ "esp:11", "oled_spi_2:DIN", "", [] ],
+    [ "esp:15", "oled_spi_2:CE", "", [] ],
+    [ "esp:6", "oled_spi_2:DC", "", [] ],
+    [ "esp:5", "oled_spi_2:RST", "", [] ],
+
+    [ "esp:3V3", "oled_spi_3:VCC", "", [] ],
+    [ "esp:3V3", "oled_spi_3:LIGHT", "", [] ],
+    [ "esp:GND", "oled_spi_3:GND", "", [] ],
+    [ "esp:12", "oled_spi_3:CLK", "", [] ],
+    [ "esp:11", "oled_spi_3:DIN", "", [] ],
+    [ "esp:16", "oled_spi_3:CE", "", [] ],
+    [ "esp:6", "oled_spi_3:DC", "", [] ],
+    [ "esp:5", "oled_spi_3:RST", "", [] ]
+  ],
+  "dependencies": {}
+}
\ No newline at end of file
diff --git a/src/wokwi.toml b/src/wokwi.toml
new file mode 100644
index 0000000..db54d99
--- /dev/null
+++ b/src/wokwi.toml
@@ -0,0 +1,16 @@
+[wokwi]
+version = 1
+firmware = "../build/firmware.bin"
+elf = "../build/firmware.elf"
+
+[[chip]]
+name = "main-display"
+binary = "chips/main-display/dist/chip.wasm"
+
+[[chip]]
+name = "secondary-display"
+binary = "chips/secondary-display/dist/chip.wasm"
+
+[[chip]]
+name = "nfc-reader"
+binary = "chips/nfc-reader/dist/chip.wasm"
\ No newline at end of file